DTI Brochure0 pages
Device Test Interfaces
DTI - Standard & Custom designs
Designed for use in demanding test
environments and to cater for custom
devices, Diagnosys has a comprehensive
range of DTIs (Device Test Interfaces).
The Diagnosys DTI range is purposely designed for use in
demanding test environments. They provide the physical
electrical interface between the pin electronics of the test
system and the device being tested.
These interfaces are constructed from a special material
DTI Range
that is precision milled and drilled, delivering a hardwearing finish that will provide years of use.
Large and robust range of Interfaces.
A critical requirement for testing components in-circuit is to
ensure good electrical contact with the pins of the device
being tested. Although there are many commercially available
test clips, they are often fragile and limited to the more
common device package types.
Diagnosys has designed and developed an extensive range of
robust DTIs for use in the test environment. This range
includes DTIs for fine pitch devices, through hole devices and
underside probing. In addition to this standard range, custom
DTIs can be provided to accommodate the many varied and
diverse package designs you may encounter.
Diagnosys DTIs use sharp pointed probes that greatly increase
the contact reliability due to the high pressure at the probe
tips. The resulting disruption of the oxide and flux that might
cover the contact areas allows the tips to make “contaminate
free” connections. The latest in our range of DTIs are 0.4mm
designs that are used for the most complex components.
While all test interfaces will eventually see some wear and tear,
the Diagnosys DTIs are also designed to be repaired, not
thrown away!
For your local office details please visit our web site: www.diagnosys.com
"