Electronic Gear0 pages

A CONTROL

OF DIVERSE
APPLICATIONS
Shake-out grid

Screening machine

Vibrating feeder/separating grid

The new development of an ’electronic gear’ scutching machine control from the house of Cyrus allows optimised use
in view of process and energy as well as resource efficient use of scutching machines with linear drive. Here, importance
is given to the largest possible flexibility of the system. This is achieved by continuously adjusting the vibrating angle
and the drive frequency, depending on the respective product. In screening technology, these applications are used in
the recycling industry among others, e.g. during drainage. Fields of application in the foundry are optimised separation
of cast iron and sand as well as gentle cast handling, for example. Here, the dynamic forces as well as the force
transmission pitch line are changed and thus interlocking of material with longer product delay time at a screening
machine, for example, can be prevented.

The operating panel shown here, including the 7“ display,
regulates the speed (frequency) and the angle of force
transmission in conjunction with the two frequency
converters in the control cabinet. Here, the display shows
the target and actual values of the speed and the vibrating
angle, for example. The ’electronic gear’ function works
without the use of a PLC (Programmable Logic Controller).

ELECTRONIC GEAR