CT R200 Datasheet0 pages
LOGO
P RODUCT
High-Speed surface
measurement on round parts
For diameters from
5 mm to 200 mm
User friendly concept
Sophisticated analysis and
automation software
Roughness measurement
on an engine part
Defect on a transmission shaft
Diameter of a turbine part
Overview
The CT R200 is a non-contact profilometer with a rotary
stage, a 200 mm x-axis, and an automated z-axis.
Round parts are placed on the rotary stage, the x- and the
z-axis move the sensor close to the surface of interest.
Then the autofocus routine positions the sensor in the
optimal distance to the surface. The sample starts
rotating and the system collects a highly accurate profile
along the entire diameter. Using the automated x- and
z- axis, different diameters on the same part can be
scanned.
A confocal sensor of 10 nm height resolution at a
measurement range of 300 microns is mounted on
the closed loop x-axis and measures with a data rate of
14 kHz. One scan of a 100 mm diameter with a lateral
resolution of 5 microns lasts 7 seconds.
In case the roundness of the part exceeds the range of
the sensor, the x-axis adjusts the distance to the part
automatically in real time during the scanning process.
The height reading is a combination of the calibrated
x-axis signal and the sensor height readout.
Applications
The CT R200 was originally designed for measuring
precision rotationally symmetrical parts with critical
dimensions and properties on surfaces of inner and
outer diameters. Using angled optics the sensor can
measure inner surfaces down to a diameter of 35 mm.
The system detects surface defects like scratches and
measures technical surface parameter like roughness
as well as diameter and roundness. Typical analyses
are
t Rmax, Rv (depth of a scratch)
t Ra, Rz, Rp, etc.
tDiameter
tRoundness
The system is used to measure and control surface
parameters on precision parts for gear boxes,
transmission systems or any other components that
require highly accurate measurement and inspection.
Due to the fast cycle time the system can be fully
integrated into the production process. Dedicated
interfaces allow the integration of an automated
handling system.
Software
The proprietary cyberTECHNOLOGIES, Windows
based software package SCAN SUITE combines
system control, data collection and data analysis in
a user friendly interface. Comprehensive profile and
roughness analyses conforming to DIN ISO
are included. All important surface parameters
as well as roundness and diameter are measured
automatically and the results can be combined with
user defined input fields or barcode input and are
stored in a database.
Technology
t Fast and accurate 3-axis scanning system
for round parts
t Measurement speed: 14 kHz
t Precision rotary stage with torque motor and t
t 0.0001° resolution
t Magnetic linear motor with 200 mm travel in x,
t lateral resolution 50 nm
t closed loop control and autofocus function
t 50 mm motorized z-axis, resolution 1 µm
t Inner diameter from 35 mm to 200 mm
t Outer diameter from 5 mm to 190 mm
t Chromatic white light sensor
t Resolution 10 nm
SLOGAN
BECAUSE ACCURACY MATTERS