HD 2303.0 THERMO-ANEMOMETER0 pages
HD 2303.0
Connections
t Input module for the probest
8-pole male DIN45326 connector
Measurement of temperature by Instrument
t Pt100 measurement ranget
-200…+650°C
t Pt1000 measurement ranget
-200…+650°C
t Resolutiont
0.1°C
t Accuracyt
±0.1°C
t Drift after 1 yeart
0.1°C/year
PROBES AND MODULES TECHNICAL DATA EQUIPPED WITH INSTRUMENT
Wind speed measurement probes
Hot-wire probes: AP471 S1 - AP471 S2 - AP471 S3 - AP471 S4 - AP471 S5
AP471 S4
AP471 S5
Air speed, calculated flow rate, air temperature
AP471 S1 - AP471 S3
Type of measure
AP471 S2
Type of sensor
Speed
NTC thermistor
Omnidirectional NTC thermistor
Temperature
NTC thermistor
NTC thermistor
Speed
0.1…40m/s
0.1…5m/s
Temperature
-25…+80°C
Measurement range
-25…+80°C
0…80°C
Measurement resolution:
0.01 m/s
0.1 km/h
1 ft/min
0.1 mph
0.1 knot
0.1°C
Speed
Temperature
Measurement accuracy:
±0.1 m/s (0…0.99 m/s)
±0.05m/s (0…0.99 m/s)
±0.3 m/s (1.00…9.99 m/s)
±0.15m/s (1.00…5.00 m/s)
±0.8 m/s (10.00…40.0 m/s)
Temperature
Minimum speed
Air temperature
compensation
Sensor working conditions
HD 2303.0
THERMO-ANEMOMETER
Battery life
The HD2303.0 is a portable instrument with a large LCD display. It is designed for use in
the fields of air conditioning, heating, ventilation and environmental comfort. It uses hotwire or vane probes to measure air speed, flow rate, and temperature inside pipelines and
vents. Temperature only is measured by immersion, penetration or air contact probes. The
temperature sensor used can be chosen from the Pt100, Pt1000.
The probes are equipped with the SICRAM module, with the factory calibration data
stored inside. The Max, Min and Avg function calculate the maximum, minimum or average values. Other functions include: the relative measurement REL, the HOLD function,
and the automatic turning off that can also be excluded.
The instruments have IP67 protection degree.
±0.8°C (-10…+80°C)
0…80°C
Clean air, RH<80%
Approx. 20 hours @ 20 m/s with Approx. 30 hours @ 5 m/s with
alkaline batteries
alkaline batteries
Unit of Measurement
Speed
Flow rate
Pipeline section for flow
rate calculation
Cable length
m/s – km/h – ft/min – mph – knot
l/s - m3/s - m3/min - m3/h - ft3/s - ft3/min
0.0001…1.9999 m2
~2m
(*) It’s referred to all the probes except the hot wire ones, which autonomy is stated in
the next pages
INSTRUMENT TECHNICAL CHARACTERISTICS
Instrument
t Dimensions
t (Length x Width x Height)t
140x88x38mm
t Weightt
160g (complete with batteries)
t Materialst
ABS
t Displayt
2x4½ digits plus symbols
Visible area: 52x42mm
Operating conditions
t Operating temperaturet
t Storage temperaturet
t Working relative humidityt
t Protection degreet
-5…50°C
-25…65°C
0…90%RH without condensation
IP67
Power supply
t Batteriest
3 1.5V type AA batteries
t Autonomy (*)t
200 hours with 1800mAh alkaline batteries
t Power absorbed with instrument offt < 20μA
Measuring unitt
°C - °F - m/s - km/h - ft/min - mph - knot - l/s
m3/min - m3/h - ft3/s - ft3/min
±0.8°C (-10…+80°C)
0,1 m/s
AP472S1…
AP472S2…
AP471S3
AP471S2
AP471S1
AP472S4…
Air speed 125
Air speed
Speed