DISC BRAKE - MODEL EMP 950 pages
DISC BRAKE – MODEL EMP 95
SPRING APPLIED, ELECTRIC RELEASED DISC BRAKE
The Dellner Brakes electro-mechanical
DELECT model EMP 95 spring applied,
electric released disc brake offers a reliable
and safe method of braking linear or rotary
motion.
The brake is compact, light weight, durable
and suitable for outdoor / dirty environments.
The disc brake is designed to adapt a brake
disc thickness of 12 - 25 mm.
One spring package included in the brake
retracts the brake pads from the disc when
power is applied.
The brake is designed as single acting and therefore especially suitable when limited space on one
side of the application is necessary, for example windmill, crane and winch applications.
To maintain full brake torque, the brake should be adjusted when below mentioned maximum air
gap value is exceeded.
Model
Tangential
braking force F
Electric
Power
[N]1)
[V DC]4)
EMP 95-10
EMP 95-14
EMP 95-18
EMP 95-27
1)
2)
3)
4)
5)
6)
7)
8)
max.
12600
17800
24000
33500
3)
min.
10700
14300
18200
27800
5)
24
24
24
24
min.
2x1,0
2x1,0
2x1,0
2x1,0
6)
max.
2x2,5
2x2,5
2x2,5
2x2,5
Estimated life of
disc spring pack
[no. of strokes]
7)
min.
>2x106
>2x106
>2x106
>6x105
Friction
area per
brake
[cm2]
Weight
[kg]
8)
max.
>2x106
>2x106
>2x106
>1x106
402
402
402
402
36
Calculated with an average frictional coefficient μ=0,42. Consideration has not been taken for external factors.
Braking force with correctly adjusted disc spring pack.
Braking force with maximum recommended air gap before adjustment is needed.
12 and 36 V DC are optional
Air gap for correctly adjusted brake.
Maximum recommended air gap before adjustment is needed.
Valid for minimum spring pack compression.
Valid for maximum spring pack compression.
Issue 1
Dellner Brakes AB reserves the rights to modification without special notice.
2)
Air gap between
brake disc and
lining
[mm]