mda0 pages
engine / genset control
automatic start
MDA
Automatic start unit
• Simple and basic unit
• 50/60 Hz compatibility
• Basic engine protection
• Preheat or “Energize to stop” output
The MDA unit from CRE Technology is a basic, microprocessor controlled unit designed
to start and stop the genset
automatically on request of an
external Remote Start signal. It
has high power relay outputs
enabling it to interface directly
with diesel gensets.
A SIMPLE PRODUCT FOR BASIC FUNCTIONS
When the engine is running, the unit monitors fault conditions and shuts down
the engine automatically if an alarm occurs. The alarms are identified with
LEDs which display the first one to occurr. On an OFF position, the module is
de-energized and the remote start is disabled with no current consumption.
The unit uses high current two part connectors for easy replacement.
ENERGIZE TO STOP CONTROL
The MDA is also able to control ‘Energize to Stop’ engines. When the ‘Energize
to Stop’ option is selected, the auxiliary relay output will be energized during
the stop timer and the led associated with this condition will be switched on.
The selection of engine type is made by a jumper switch.
50/60 Hz COMPATIBILITY
The unit is able to operate with both 50 and 60 Hz systems. The selection is
made with a jumper switch.
RELIABLE AND SIMPLE
The MDA is dedicated to basic applications which need no extra costs or expensive hardware. CRE Technology has just added two things: Reliability and
After Sales Service. All CRE Technology products aim to provide the same satisfaction levels. The MDA has passed EMC and Low Voltage tests, and all units
are 100% tested before delivery.
AFTER SALES SERVICE
Like every CRE Technology product, the unit also benefits from our technical
support. All CRE products are delivered with one year warranty.
www.cretechnology.com
"