SC to SC Patch cord, 1 fibre, tight-buffered cable, LSZH, 2.8 mm legs0 pages
SC to SC Patch cord, 1 fibre, tight-buffered
cable, LSZH, 2.8 mm legs
Single-mode (OS2), 15 m
143
Patch cables are used for non-permanent connections
between patch panels, transmission equipment, etc.
Pre-assembled cables allow for the implementation of
complete “plug & play” solutions. When such a solution
is adopted with accurate dimensioning and appropriate
cable routing, it is possible to install even large cabling
systems rapidly.
Patch cables
are used
Features and Benefits
Connectors
- SC connector according to TIA/EIA-604 -3
- All connectors are tested to FOTP -21.
- Connectors are pre-radius polished to provide the optimal end-face geometry for long-term performance.
Cable
Low smoke (IEC 61034) and zero-halogen (LSZH), flame
retardant to IEC 60332-3-24 (C) and noncorrosive to IEC
60754-2 (FRNC)
Cables are metal free; hence, there are no ground-loop
or potential-equalisation problems
Completely dry design (without gel)
Colour of outer sheath: OM1, OM2 – orange; OM3, OM4
– turkuoise; OS2 – yellow
Part Number: 585801R3Z31015M
Standards
1
1
Intermateability
9.41
115
TIA/EIA-604-3 / TIA/
EIA-604-3
0
Specifications
General Specifications
Flame Rating
LSZH/FRNC
Cable Assembly Type
Single Fibre
Fibre Category
Single-mode (OS2)
Product Specification 585801R3Z31015M_EMEA_BEN
Page 1 | Revision date 2013-05-22