M 2103 C0 pages

BUL 02026

Chlorine gas
measuring sensor
series

M 2103 C

• chemical additives are not necessary
• signal is proportional to gas concentration
• minimal maintenance costs

General:
The M 2103 C series Controlmatik ABW measuring probe for chlorine gas is designed to measure
and indicate chlorine concentrations in the air.
The probe is mounted in an IP 65 housing and is connected via connector to the amplifying elec
tronics, which is also mounted in the IP 65 housing.
Sensor is, with two-wire current loop, connected to the unit according to the enclosed scheme.

The M 2103 C Series Measuring Probe is
used to measure and indicate chlorine gas in
the air and to provide safety in storage areas
and in places where the gaseous chlorine and
Natrium Hypochlorite are dosaged.
The sensor operates on the basis of chemical cell and a diffuse capillar blockade. The
hydrochloric acid concentrate in the chemical
cell is regenerated during the chemical reaction
and a free oxigen is released; the quantity of the
released oxygen defines the signal at the output.
Sensor in a separate housing - easy to
exchange!

Mesuring and regulation equipment / Sensors / Chlorine gas measuring sensor

62