DS-EISK8PG0B0 pages
EISK8P-GT
data
SHEET
8-Port Skorpion Gigabit Switch — Now with PoE!
Cost Effective, High-speed — Compact Size
The EISK8P-GT Skorpion Gigabit Switch is an 8-port
unmanaged Ethernet switch with Gigabit Ethernet (GigE)
performance on all ports and Power-Over-Ethernet (PoE)
on four ports. GigE jumbo frames up to 9216 bytes are
supported for maximum system performance. For
10/100 Mbps legacy devices, its port speed automatically
slows — accommodating any Ethernet automation system.
This low-cost compact unit has a rugged metal enclosure
and is intended for DIN-rail mounting in control panels.
Ports 5 – 8 PoE provide data and power over one
Cat5e cable. The unit acts as power sourcing equipment
(PSE) — supplying up to 15.4 W per port for IEEE
802.3af-compliant powered devices (PD). PoE
eliminates the need for additional power supplies for
Ethernet-enabled devices placed in challenging
locations — such as wireless access points or IP
cameras mounted out of reach or outdoors. PDs can
be located up to 100 metres from the switch.
This plug-and-play switch requires no configuration. All
ports automatically configure data rate and duplex using
the Auto-negotiation protocol. Depending on the
capability of the link partner, communication is set at 10,
100 or 1000 Mbps at either half- or full-duplex. All ports
accommodate either crossover or straight-through cable
via the Auto-MDIX protocol.
The unit is powered from 48 VDC. LED indicators assist
in troubleshooting network issues.
•t Plug-and-Play operation
•t DIN-rail mounting
•t 4 PoE ports deliver up to 15.4 W each
•t Rugged metal enclosure
•t 10BASE-T/100BASE-TX/1000BASE-T
•t Diagnostic LEDs
•t Shielded RJ-45 connectors
•t Enhanced EMC compliance
•t Auto-negotiation of speed and duplex
•t CE Mark compliant, RoHS compliant
•t Auto-MDIX supports crossover cables
•t 48 VDC powered
•t LEDs for link/activity, data rate, power, and PoE status
CONTROLS
CONTEMPORARY
®
DS-EISK8PG0-BA2
"