درباره سازنده

American-Made Success since 1928

Conbraco Industries was created when two Detroit-based manufacturers of brass valves and fittings merged in 1928 forming Consolidated Brass Company. Over 80 years later, Conbraco is an American success story that's still being written.

The company now known as Apollo® Valves earned a reputation for developing new products to meet emerging market demands. In 1968, the company introduced its Apollo® Series 70 ball valve to the commercial market.

A revolutionary innovation at the time, the product became the most specified ball valve in the world. Line extensions have resulted in new materials, new sizes and new applications for the classic Apollo ball valve.

In 2005, the company brought all of its products under the Apollo® Valves brand. Products which had been sold under the Conbraco brand included plumbing and heating products, water gauges, pop safety and relief valves, marine fittings and backflow prevention devices. Those lines joined the company's ball valves, actuators and mixing valves as part of the complete Apollo Valves family of products.

"As proud as we are of the Conbraco tradition that goes back eight decades, it is the Apollo name, and the quality and reliability that it stands for, that has won the confidence of our customers," said Cal Mosack, Executive Vice President.

Conbraco was founded by Clarence Mosack, grandfather of Cal Mosack, company president Glenn Mosack and vice president of marketing Carole Mosack Lee. They assumed control of the company after their father Carl Mosack retired as president in 2001. The Mosack family has led the privately-held company for three generations.

Nearly all Apollo® valves are produced in U.S. facilities that are second to none in the industry, including ISO-registered, state-of-the-art foundries and manufacturing facilities in Pageland and Conway, S.C. The company's headquarters is located in Matthews, N.C.

"Some of our competitors claim to be domestic while they are really sourcing most of their products from the Far East", said Glenn Mosack. "We actually manufacture 95 to 98% of all the components in our valves in our own plants in the Carolinas, right down to the yellow handles!"

Investments in manufacturing, quality control and distribution have surpassed $100 million in the past 10 years alone. Employing "lean manufacturing" practices in U.S. plants allows the company to improve deliveries, control costs and provide better customer service.

77V series 1/2" - 2"0 pages

نسخه متنی

Job Name:
Job Location:
Engineer:
Contractor:
Tag:
PO Number:
Representative:
Wholesale Distributor:

77V Series

APOLLOXPRESS® Press End Brass Ball Valve
(1/2” through 2”)

DESCRIPTION

The APOLLOXPRESS™ 77V Series two-piece press ball valve is ideal for installation in most
plumbing and heating systems. Features Leak Before Press™ technology and 250 psig maximum
working pressure. Proudly Made in the USA.

FEATURES
•t
•t
•t
•t
•t
•t
•t
•t
•t
•t
•t

2 piece, heavy pattern forged design
Full-Port Flow
Superior RPTFE Seats and Packing
Adjustable Stem Packing
Ridgid® XL Press Tool Compatible
Leak Before Press™ Technology
Blow-Out Proof Stem
Corrosion Resistant Materials
Silicone Free Assembly
100% Factory Tested
Made in USA, ARRA Compliant

PERFORMANCE RATING

•t Maximum Operating Pressure 250 psi
•t Temperature Range: 0°F - 250°F

APPROVALS
•t
•t
•t
•t

MSS SP-110 Ball Valves
NSF/ANSI 61 Section 8
Directive 2002/95/CE (RoHS) Compliant
IAPMO IGC-157 Ball Valves (1/2”-2”)

APPROVED APPLICATIONS

•t Water, chilled and hot: 33° - 250°F
•t Hydronic Heating (90% glycol max)
•t Low Pressure Steam, 15 psi max
•t Not suitable for flammable gas service
•t Designed for direct mechanical
t connection to ASTM B88-Type K, L,
t and M copper tubing in the hard drawn
tcondition.
•t Not compatible with soft annealed
t copper tubing.

options

•t (-01) Standard Lever Handle
• t (-04) 2 ¼” Stem Extension
•t (-07) Tee Handle
•t (-11) Therma-SealTM Insulating Tee
tt
Handle
•t (-27) Locking Handle SS
•t 77V140 Series – SS Ball & Stem
•t 77V Large Diameter 2-1/2” - 4”
•t 77VLF Series – Lead Free, 0.25% Pb max.

STANDARD MATERIALS LIST
Part Name
Body
Seat
Ball
Stem Packing
Nut
Stem
Retainer
Handle
Gland
O-Ring Seals
Crimp Ring
Spacer Ring

Material
Forged Brass, C37700
RPTFE
Brass, ASTM B16, C36000
Chrome Plated
RPTFE
Corrosion Resistant Plated Steel
Forged Brass, C37700
Forged Brass, C37700
Plated Steel / Insulated Polyvinyl
Brass, ASTM B16, C36000
EPDM
316 SS
Nylon

dimensions
Model
Number
77V10301
77V10401
77V10501
77V10601
77V10701
77V10801

Size
(in.)
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"

A
0.50
0.75
1.00
1.25
1.50
2.00

Dimensions (in.)
B
C
D
1.57
2.89
1.66
1.90
3.63
1.91
2.20
3.88
2.11
2.23
4.22
2.44
2.84
5.45
2.91
3.40
6.57
3.69

E
2.85
3.86
3.86
4.75
5.42
7.77

Wt.
(lbs.)
0.4
0.9
1.2
2.3
3.4
6.0
Apollo Valves, Manufactured by Conbraco Industries, Inc.
701 Matthews Mint-Hill Road, Matthews, NC 28105 USA
www.apollovalves.com | (704) 841-6000

This specification is provided for reference only. Conbraco Industries Inc. reserves the right to change any portion of this specification without notice and without incurring
obligation to make such changes to Conbraco products previously or subsequently sold. Please visit our website @ www.apollovalves.com for the most current information.

درباره سازنده

American-Made Success since 1928

اطلاعات تماس

77V series 1/2" - 2"0 pages

تمام کاتالوگها و بروشورهای فنی شرکت Conbraco Industries

IRAN INDUSTRY EXPO

خدمات بازرگانی