Clippard Maximatic FRLs0 pages
®
®
Maximatic Filters, Regulators & Lubricators
Maximatic FRLs condition and prepare compressed air for use in fluid
power systems. Pneumatic applications with properly conditioned air
will operate longer, cost less and improve system efficiency. Clippard
offers five different sizes from #10-32 to 1” NPT of Filter, Regulators,
Lubricators and combination units. Their modular design and interconnecting brackets provide flexibility and facilitates simple field installation
and/or modification.
Filters capture solid particulate and remove water by “spinning” the air
centrifugally. Water and larger particles are thrown against the side of the
bowl where they condense and/or fall to the lower part of the bowl.
Smaller particles are captured as the air flows through the filter element.
Controlling pressure is an important requirement in all systems.
Maximatic Regulators are adjustable from 7 to 125 psig. For applications
requiring better resolution, 7 to 30 or 7 to 60 psig models with spring are
available. The #10-32 size is a piston-style due to its small size, while the
1/8” to 1” are a diaphragm design. Both types feature a poppet-type inlet
valve which enables free reverse flow when the inlet air is removed.
Body Material: Die Cast Aluminum
Maximum Operating Pressure: 150 psig
Regulating Range: 125 psig standard, 30 psig and
60 psig optional
Regulator Type: Relieving
Filter Drain: Semi-Automatic Differential or
Optional Automatic Drain. When the air supply is
below 7 psig, the semi-automatic drain will open.
Pneumatic actuators and valves perform better and last longer when
properly lubricated. The bowl serves as a reservoir for the oil and supplies oil through the pick-up tube when pressurized. The amount of oil
dispersed is controlled by an adjustable needle valve as well as the flow
rate through the lubricator.
Bowl Material: Polycarbonate standard. Aluminum Cast with sight glass
available.
Bowl Guard: Steel on models indicated
Filtration: 25 micron sintered brass filter standard, 5 micron optional
Temperature Range: 32° to 130°F (-0 to 54°C)
Ordering Guide
Type
Enter
FRL . . . . . . . . . . . . . . . . . . .FRL
Stacking FRL . . . . . . . . . . .FRLS
Stacking Filter-Regulator . . .FRS
Enter
Filter . . . . . . . . . . . . . . . . . . .F
Regulator . . . . . . . . . . . . . . .R
Lubricator . . . . . . . . . . . . . . .L
Body/Port Size
Enter
#10-32 . . . . . . . . . . . . . . . .1N
1/8” NPT . . . . . . . . . . . . . . .2P
1/4” NPT (Standard Flow) . .2Q
1/4” NPT (High Flow) . . . . .3Q
3/8” NPT (Standard Flow) . .3W
Enter
3/8” NPT (High Flow) . . . . .4W
1/2” NPT . . . . . . . . . . . . . . .4Z
3/4” NPT . . . . . . . . . . . . . . .4A
1” NPT . . . . . . . . . . . . . . . .5B
This numbering schematic is shown
for illustration purposes only. All
possible configurations are not
available—For standard models,
see the products illustrated
in this catalog.
Automatic
Drain (D)
Options
Example: MM F - 4Z - D M
MM
-
Metal 30 psig (P30) 5 Micron
Bowl (M) 60 psig (P60) Filter (F5)
-
Maximum Value. Maximum Performance.
18