BNP Double 65 Pressure Blast Cabinet (Rev. A)0 pages
®
BNP Double 65 Pressure Blast Cabinet
Clean
Peen
Deburr
Finish
Model BNP Double 65P 900 DF
(DF not shown)
For tough cleaning jobs, pressure blasting delivers higher abrasive
velocity for greater impact intensity, compared to suction blasting, and
can increase your production rate by as much as 300 percent.
Common
Applications
• Remove rust, mill scale,
heat scale, and carbon
buildup from metals
• Strip paint, powder
coating, plating, and
anodizing from parts for
rework
• Eliminate burrs, reduce
parting lines, remove
flashings and other defects
from castings and injection-molded parts
• Extract residual sand from
castings
• Beautify steel, stainless
steel, aluminum, brass and
other metals with a
uniform matte finish
• Etch artwork and lettering
into glass, stone, plastics,
metal and other materials
• Clean release agents and
material buildup from
molds
BNP Double 65 Pressure Cabinets Feature:
Safety
Full-length, neoprene-on-fabric gloves resist
wear and protect operator.
Safety interlocks interrupt blasting if either door
is opened.
Productivity
Two stations provide easy access to blast from either
station to accomodate long or complex parts. One
nozzle and foot pedal are standard.
High efficiency, 2.0 cubic foot capacity, ASMEcoded pressure vessel, fitted with 1" ID piping,
industrial-quality blast hose and couplings and cabinet
integrated controls.
Unique Air Logic system (pilot actuated) to maximize air flow to the nozzle.
Ceiling-mounted, two-tube fluorescent light fixture
with abrasive resistant Lexan® cover for
extraordinary visibility.
14-gauge steel all-welded construction, forms a rigid,
long-lasting cabinet shell.
Convenience
Tilt-out window, for tool-free glass changes in minutes.
Double-wall, sound-insulated doors on both ends,
industrial-quality lift-off hinges.
Pressure regulator, gauge, air and electric switch
mounted within easy reach.
Built-in blow-off gun helps keep dust inside the
cabinet, not on your floor.
Tungsten Carbide
Blast Nozzle
The standard No. 3 (3/16-inch)
tungsten carbide nozzle is perfect for most blasting, while an
optional boron carbide nozzle
stands up to hundreds of hours
of blasting with aluminum oxide
or other aggressive media.
Popular Accessories
• Dual nozzle upgrade pkg.
• Adjustable Gun Mount
• Adjustable Vortex Tube
(for lightweight media)
(Standard on RP models)
• Air-powered Vertical Lift
Door
• Aggressive Media Kit
• Curtains ( black or high
visibility white)
• HEPA filter (RP model only)
• Manometer Kit
• Time-delay door interlocks
• 20" and 30" Dia. Turntables
• Work Car & Track Assembly