2 Cuft Classic Blast Machine System0 pages
Description
®
TECHNICAL DATA SHEET
Note: For safe, efficient blasting, read
and follow the owner's manual and seek
training for everyone who will use this
equipment.
Field-portable, medium-duty, industrial,
single-chamber blast machine rated at 150
psi working pressure. Model 1642 has
1- inch piping and holds 2 cubic feet of
media (200 lbs expendable, mineral
abrasive). This unit is equipped with FSV
abrasive metering valve and remote controls. Complete system includes coupled
hose, nozzle, supplied air respirator, and
many accessories.
2 Cuft Classic
Blast Machine
Systems
with 1" piping
Model 1642 with
HP respirator and
accessories
Purpose
High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most
surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.
Model 1642 holds 2 cubic feet of abrasive providing 15 minutes of blasting at
100 psi with a No. 5 (5/16-inch) nozzle.
Requirements for Operation
These items are required but not included with this equipment:
• Clean, dry, compressed air of sufficient
volume to maintain desired pressure at
the nozzle. Refer to Air Consumption
Chart in Blast Off 2 booklet
(publication stock no. 09294).
• Minimum of 50 psi needed to close the
pop-up valve and pressurize the blast
machine.
• OSHA-required remote control system
that interrupts blasting if operator
should lose control of the nozzle when
blast machine is pressurized.
• NIOSH-approved, type CE, suppliedair respirator.
• Grade D breathing-air supply as
defined by Compressed Gas
Association Commodity Specification:
G-7.1 (Refer to www.cganet.com).
• Abrasive blast media specifically
manufactured for abrasive blasting and
appropriate for your application.
• Appropriate blast suit, work boots,
hearing and eye protection.
Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting;
releasing it stops blasting. The blast machine contains abrasive and meters it into
the compressed air stream.
Approvals and Certifications
Blast machine pressure vessel built to
American Society of Mechanical Engineers (ASME) specifications for
150-psi working pressure. Vessel is hydrostatically tested and National
Board-certified.
Remote control system complies with
OSHA regulation 1910.244 (b).
Advantages
• Field-portable, industrial-quality
blast machine manufactured to
ASME code.
• 1-inch piping allows up to 50
percent more air flow when compared
with 1/2-inch piping.
• Industrial-quality valves, piping and
fittings designed to maximize air flow
and minimize energy required to
operate the system.
• FSV abrasive metering valve
maintains smooth, consistent,
adjustable media flow.
• State-of-the-art NIOSH-approved
respirator with DLX comfort-fit
suspension.