Z-Form® Zero Clearance Bolt & Sleeve Assembly0 pages
Z-Form Zero Clearance Bolt & Sleeve Assembly Acument® Global Technologies Quality first. Engineered to last.® Zero clearance. Zero Slip. Typical bolted joints require clearance to accommodate machining tolerances and rely solely on clamp load to prevent joint slip. In joints subjected to high shear loads, traditional bolted joint assemblies may not be capable of keeping the clamped components from moving laterally in relation to each other. Dowel pins and locating sleeves are traditionally used to resist these shear loads. The Z-Formٙ Assembly consists of a shoulder bolt with a pre-assembled deformable sleeve which, when installed completely eliminates clearance between the bolt and the through hole in the clamped component. This increases resistance to slippage, retains clampload and extends gasket/seal life. Features Sleeve expanding shoulder Օ Retained deformable sleeve Zero clearance joint interface Benefits Օ Extremely high level of torque capacity for drive line joints Prevents lateral slippage in joints subjected to high shear loads Օ Allows for the use of fewer or smaller fasteners in many applications Specifications Available in standard sizes from M6 through M12 Industry Applications Օ Drive Trains Flywheels Օ Brake Systems Ring Gears Օ Flex Plates Bearing Caps Floating Axle Hubs Transmission Housings Suspension Components Holding the world together. In one customer validation test involving a ring gear application, Z-Formՙ Bolt & Sleeve Assembly outperformed the existing fastener by achieving 18X the number of reversing cycles. As a result, fewer or smaller fasteners may be used while still retaining a longer lived and completely serviceable joint.
"