عضویت 
ورود اعضا
راهنمای خرید
TB-CDP02-TX / TB-CDP02-RX0 pages
REIMESCH KOMMUNIKATIONSSYSTEME GMBH
TB-CDP02-RX/TX
- Status Translation System & Development Kit -
The test boards were developed to demonstrate and use the CDP-TX-02FP-R
and CDP-RX-02FP-R. Besides this it is possible to develop own software for
these boards.
It consists of a transmitter input board and receiver output board.
In combination with the radio modules, it is a full 8 channel digital status
translator which can be practically used for various applications.
Features of the development set
Features of the status translation
• TX board: 8 inputs (opto coupler) & RX board: 8 outputs
(photo MOS relays).
• Manual and automatic channel control
• Different transmission types (test mode, continuous mode,
triggered mode)
• Learning and pairing mode (TX 1 : RX N or TX N : RX 1)
• 8 monitoring LED’s on the receiver board
• Data packets with CRC16 checksum
• Fail safe mode with max error count
• Calibrated to -116dBm for the automatic channel control
• Full programmable Atmel® ATMEGA324P over ISP
port
• 32 kb internal flash and 2 kB EEPROM for own
software
• 2 UART ports for CDP-02, debugging/data transmission and reception
• 3 DIP switches for configuration
• Complete documented source code for the status
transmission
Technical data
General specifications
Applicable standard
EN 300 220-3 Ver.1.1.1
Frequency
433.1875 – 434.7750 MHz
Channels
128
Antenna impedance
50 ohm
TB-CDP02-TX
Input opto coupler
Opto coupler LED
current
Dimensions
Weight
Storage temperatur
-30 to + 70°C
Operating voltage
5 – 15 V DC
Data rate
TX on, all inputs off / 15 V
Typ. 22 mA
TX off, all inputs off / 15 V
Typ. 2.2 mA
Input
-20 to + 60°C
4800 bps
TB-CDP02-RX
Typ. 66 mA
Current consumption
Operating temperature
Input current for each
channel / 5V +V Led
8 opto coupler
Typ. 143 mA
Current consumption
RX on, all outputs on / 15V
Typ. 53
RX on, all outputs off / 15V
Typ. 11.3 mA
Current for each channel /
15 V
Output
8 Photo-MOS relays
4-15 V DC
Output relay
Max. 48V, 300 mA
1.5 – 8 mA
Dimensions
100 x 80 x 13 mm
70 x 80 x 13 mm
Weight
90 g
60 g
Reimesch Kommunikationssysteme GmbH / Friedrich-Ebert-Straße / D-51429 Bergisch Gladbach
+49 (0) 22 04 / 58 47 51 — info@reimesch.de — http://www.reimesch.de
