Mine Spec Welding Inverters0 pages
Mine Spec Inverters
IP23S Protection Class
Stick (MMAW)
Lift TIG (GTAW)
HF TIG (GTAW)
[170Ti Only]
Shielding Gas
Solenoid Control
Transarc 130i
Transarc 170i
Transtig 170Ti
Remote Socket
Integrated
VRD fitted
Insulated Plastic
Housing Design
Safety and Efficiency - getting home at
the end of the day is what it’s all about.
Loaded with safety features, our new Transarc 130i & 170i
and Transtig 170Ti single-phase Mine Spec inverters are more
efficient and easier to control than ever. VRD ensures voltage at
the Stick before you start is just 8V, integrated Fail To Safe will
shut the unit down if voltage exceeds 35V whilst not welding and
insulated plastic housing with an IP23S rating ensures your safety
when working in confined spaces or outdoors.
Compliant to AS 60974.1
Stick (MMAW)
Process Capabilities
Conforms to the Requirements of
AS 1674.2
Lift TIG (GTAW)
Process Capabilities
Conforms to MDG25
Power Source is Fitted with HF Start
in TIG Mode (170Ti Only)
VRD Virtually Eliminates
Electric Shocks when Not Welding
8
Digital Amperage/
Voltage Meter
Fail to Safe Shutdown if VRD
Malfunctions
Power Factor Correction (PFC)
Improves Product Efficiency
Deadman Switch Eliminates
Electric Shocks when Not Welding
Intelligent Fan Control
The 170i & 170Ti weigh in at a slight 11kg and the 130i is a
shade over 7kg, so you can throw one of these over your shoulder
and get straight on with the job.
Enclosure Rated to IP23S Permits
Outdoors Use as Outlined in AS 1674.2
Braided Supply Lead
Insulated Plastic Housing Eliminates
Arc Strike Hazards on Housing
IP66, 10A Supply Plug (130i only)
IP66, 15A Supply Plug (170i & 170Ti)
Mine Spec Plants – packed with safety
240 Volt, 15 Amp Supply Lead Fitted
to Power Source. (170i & 170Ti)
Power Source Provides
DC Welding Output.
Max. Electrode Size 4.0mm. Suitable
for all Electrode Types. (170i & 170Ti)
Current Range for this Power Source
is 5 to 130A (130i Only)
240 Volt, 10 Amp Supply Lead Fitted
to Power Source. (130i Only)
Current Range for this Power Source
is 5 to 170A (170i & 170Ti)
When you are looking for a safe, power efficient and high
performance machine you can’t go past the Transarc 130i or 170i
Mine Spec Inverters.
With operator protection being paramount the Transarc and Transtig
Mine Spec Inverters are packed full of safety features including VRD
that conforms to AS 1674.2, Fail to Safe and an insulated plastic
housing that is IP23S rated.
The Mine Spec machines come with a braided and reinforced
supply lead that virtually eliminates electric shock from a damaged
power cord. These models also come standard with a heavy duty, IP
66 rated and compliant 10A (130i) or 15A (170i, 170Ti) supply
plug, which screws into place and forms a weather proof seal
against damp, dirt and grime.
Another safety advantage of the mine spec unit is the stick
electrode holder with Deadman Switch which ensures that voltage
at the electrode before you start is zero volts. Voltage then
increases to 8V (VRD on) when the Operator presses the Deadman
switch to start welding.
Your welding efficiency will also be enhanced as these units
have exceptional arc start and run performance and include TIG
shielding gas controls that eliminate wasted gas between welds.
These Transarc units also have an optional TIG torch with remote
control function that allows you to adjust your weld current setting
from the torch while welding.
Max. Electrode Size 3.2mm.
Suitable for All Electrode Types
Except Cellulose (130i Only)
3 Year Limited Warranty
170Ti with High Frequency
In addition to your safety, weld performance is also essential, so
when you’re looking for better weld quality without contaminating
your TIG tungsten electrode, the 170Ti with high frequency start
feature raises the bar. You’ll get a more positive arc start at a lower
amperage setting – one that starts first time. So there’ll be no more
scratch starting making this unit ideal for pipe work and other DC
TIG welding applications.
The Mine Spec units are ideal for those welding in confined spaces
specifically in construction and maintenance on mining sites.
www.cigweld.com.au
"