C-GRID: C12-1.5x1.50 pages
Technical Data Sheet
March 2010
C12 – 1.5 x 1.5
Carbon Fiber Reinforcing Grids for Concrete Structures
DESCRIPTION C-GRID® C12 – 1.5 x 1.5 is one of the C12 Series of medium strength carbon fiber grid for reinforcing concrete structures.
Features
Applications
Non-corrosive; can be used with as little as
1⁄4” (6 mm) of cover
Cast stone reinforcements
Requires less concrete cover leading to
lighter structures
Concrete countertops
Lightweight, easy to handle and use; can be
cut to fit using conventional tin snips
Thin topping slabs and overlays
Decorative concrete applications
High tensile strength and modulus
Outstanding mechanical bond with concrete;
requires a minimum of 1⁄4” (6 mm) to develop
its strength
PHYSICAL PROPERTIES
carbon fiber and epoxy resin
Color
black
Grid geometry (longitudinal x transverse spacing)
1.5” x 1.5” (38 mm x 38 mm)
Supply form (custom widths and lengths also available)
36” x 85 ft (0.914 m x 25.9 m) rolls
TYPICAL MECHANICAL PROPERTIES
TRANSVERSE PROPERTIES
LONGITUDINAL PROPERTIES
Individual strand cross-sectional area
0.000716 in2
(0.46 mm2)
0.000716 in2
(0.46 mm2)
Average number of strands per unit width
8 strands/ft
(26.25 strands/m)
8 strands/ft
(26.25 strands/m)
0.005728 in /ft
(12.12 mm /m)
0.005728 in /ft
(12.12 mm2/m)
232 lbs
(1.03 kN)
232 lbs
(1.03 kN)
Grid tensile strength per unit width
1,860 lbs/ft
(27.08 kN/m)
1,860 lbs/ft
(27.08 kN/m)
Tensile modulus of elasticity
34,500 ksi
(238 MPa)
34,500 ksi
(238 MPa)
Area of strands per unit width
Strand tensile strength
Strand strain at rupture
2
2
1.3%
2
1.2%
Application Use Note: C-GRID® remains a relatively novel material without the extensive performance history of traditional construction materials. Reported properties are average values, not design values. Structures and applications
using C-GRID® should be designed using appropriate safety factors or load and strength reduction factors. All applications utilizing C-GRID®, including critical life safety and fire rated structures, should be designed and reviewed by a
licensed engineer experienced with FRP materials. The data expressed herein is believed to be accurate at the time of publication; however, it is subject to change without notice.
1.t
2.t
3.t
4.t
5.t
Notes:
Centerline-to-centerline spacing between strands is nominal and based on the average number of strands per unit width. Actual spacing may vary by ± 0.10” (± 2.5mm).
Individual strand cross-sectional area is normalized to the cross-sectional area of the fibers in accordance with ACI 440.2R. The actual measured thickness and width are larger and shall not be used for design purposes.
The longitudinal direction is in the direction of the roll, and the transverse direction is across the width of the roll. For example, if a roll of C-GRID® is 36” wide, the carbon strands in the transverse direction are 36” in length. If a
roll of C-GRID® is 500 yards long, the longitudinal strands are 500 yards in length.
Reported tensile strengths are based on the average minus two standard deviations (AVG-2s) of a large population of test results.
Tensile modulus values are based on properties reported by the carbon fiber supplier. C-GRID® exhibits linear elastic behavior, so failure strains are estimated using Hooke’s Law.
Chomarat North America
2901 New Pond Road
Anderson, SC 29624 - USA
+ 1 864 328 1700 tel.
+ 1 864 260 3364 fax
info@chomarat.com
www.chomarat.com
C-GRID® C12 – 1.5 x 1.5 Carbon Fiber Reinforcing Grids f
"