SERIAL BIG DISPLAY0 pages

FUNCTION Big display is suitable for application in any industrial and civil system. Is designed to work with the weight indicator our model LCD. The GC serial display is equipped with a serial line input RS232 and RS485. This input read the data and shows it. There are not calibration or setting. The unit is available for installation inside or outside and the fixing system is trough two bracket on the side of the display. GC01 GC02 GC03 ■ ■ ■ ■ ^^^^^^ M TECHNICAL SPECIFICATION Supply 18Vac / 24Vdc ± 10% 18Vac / 24Vdc ± 10% 18Vac / 24Vdc ± 10% Input serial RS232 / RS485 serial RS232 / RS485 serial RS232/ RS485 Baud rate from 600 H 19200 bit/sec from 600 H 19200 bit/sec From 600 H 19200 bit/sec Material box aluminium aluminium aluminium Framed front panel backboard backboard Material front panel Plexiglas Plexiglas Plexiglas Overall dimension height = 72mm height = 120mm height = 205mm Width = 144mm Width = 400mm Width = 780mm Depth = 120mm Depth = 100mm Depth = 60mm Panel cut-out H = 68mm +0,7; L = 138mm +1 Fixing with bracket Fixing with bracket Display 6 digits height: 13mm 6 digits height: 75mm 6 digits height: 160mm Housing IP52 IP52 IP52 Distance reading « 5m « 30m « 50m Max angle reading 45° 45° 45° Serial Communication The display shows the numeric data transmitted in ASCII code. Each byte must have the following format: 1 bit of start, 8 bit of data, 1 bit of stop and no parity. The acknowledge data are contained between the two space and after the colon, of the message transmitted from the instrument LCD ALARM: If the display don't receive any information or if receive a wrong information for more of 10 seconds the display shows the following message ERRCOM. The correct indication start automatically when the display receive a correct data. CELMI s.r.l. Tel+39-0245712209 Largo Brugnatelli 13/16 Fax+39-0245705836 20090 BUCCINASCO (MI) ITALY Internet:www.celmi.com