CS299MXL20 pages

CS299MXL2
PNEUMATIC UNDERPINNER
The new CS299MXL2 is designed to meet the needs of every framer
looking for high quality joins and comfort of use, thanks to the adjustable
fences and the new patented retractable Ultra clamps.

FEATURES OF THE CS299MXL2
• Wide joining capacity : 190mm stroke (7’’½)
For mouldings up to 150mm wide (6’’) and 112mm high (4’’ 2/5)

• Ultra Powerful Double-action « push and tighten » rebate clamp
Position one of the moulding pieces up to the guide, then lay the second piece
roughly place. The special action of the clamps draws them accurately and firmly
together. Indeed, the clamps literally bite into the rebate of the 2 pieces of mouldings
to pull and tighten them very strongly against each other. This ensures a high quality
join every time, even on very wide mouldings. This is unique to Cassese.

• New retractable Ultra clamp system
Patented “Ultra” clamp system now retracts into table leaving a flat surface.
Great for handling big frames!

• Patented adjustable fences
Adjusts for « less than perfect » 45 cuts and backs not 9
prevent gaps in the top or bottom of the join.

to bottom, in order to

• Clamping of mouldings activated by foot-pedal
• Wedge firing activated by push button
• Automatic position lock
Carriage is locked in position during insertion of nails allowing for consistent
stacking of nails.

• Built-in extension arms for large frames
• New magnetic XL adjustable top clamp
Quickly adjust hold down height. Just change rubber end for hardwood or softwood.
Now with quick-change magnetic hold-downs.

. Patented self-adjusting back supports

• No tools required to change wedges’ sizes
Uses only genuine Cassese patented cartridge wedges. They are color coded with a
full range of sizes available ( 3, 5, 7, 10, 12, & 15 ) most available in hardwood and
softwood versions. Quality and performance!
• No need to adjust the pressure of the wedge shooting system
When changing between softwood wedges and hardwood wedges

• Minimum service required
• Button to adjust the pressure of the horizontal clamps.
To be used when you replace regular clamps with optional soft rubber clamps or when
you join very softwood moulding.
Included Accessories

Mouldings
Width

5mm-150mm

Height

7mm-112mm

Smallest Internal Frame size

Weight

85mm x 85mm
60 Kg

Length
Z21500

Z1783

Z506

Z6532

Z3078

Optional Accessories

490mm

Width

450mm

Height

Z1791

Z18065

1100mm

Air supply

Z20027

Z1813

Z1814

Z1800

Z1804

Compressed air at
7 bars using 5
litres per cycle

Z3212

CASSESE SARL - 8 rue Denis Papin - Zone Industrielle - 77390 Verneuil l'Etang - France
Tel: + 33 (0) 164 42 49 71/73/74 - Fax: + 33 (0) 1 64 42 58 94 - Web Site : www.cassese.com