Contact angle Measuring Machine for ball bearings0 pages

demagnetizing systems Excellence in Demagnetization © Bussi Demagnetizers Contact angle Measuring Machine for bail bearings Machine "TYPE 1" Dimension range: Bearings 0 20 - 180 mm. Height 4 - 40 mm. Machine "TYPE 2" Dimension range: Bearings 0 100 - 360 mm. Height 16 - 58 mm. Performances: » Bail presence check ( except for blind bearings) » Blind bearings : it is possible to take the measurement, by positioning a small tool on the cage » Measurement of the contact angle: direct display in degrees and tenths of a degree (e.g. 16,5 °) » Range of measurement : 0 - 89.9 ° » Resolution : 0.1 ° » Measurement precision : ± 0.20 ° » Cycle time : machine type 1 - 14 Sec; machine type 2 - 17 Sec » Productivity/hour : machine type 1 - 250 bearings; machine type 2 - 210 bearings » Memory : 1500 types of bearing » Data to set (only the first time, from the machine panel or by means of PC): type of bearing, pitch diameter, ball diameter, num.balls , no. run-in revolutions, no. measurement revolutions, spindle load. » For acceptance-refusal of the bearing, for every type of bearing, it is possible to set the min-max value of the contact angle. ( e.g. 25,0° ± 2,5° ) » The machine displays the contact angle: A) Fixed, black on white, for the values in the range set B) Flashing, for the values outside the range set , with a signal for the refusal of the bearing Bussi Demagnetizing Systems www.bussi-demagnetizers.com Via Valpellice 13, 10060 . San Secondo di Pinerolo (TO) ~ ITALY bussi@bussi.it Email: bussi@bussi.it