Material Safety Data Sheet0 pages
Material Safety Data Sheet
Fastite 27-A Pipe Joint Lubricant
Date of Preparation: August 1998/Revised 4/2006
Section 1 - Chemical Product and Company Identification
Product/Chemical Name: Fastite 27-A Pipe Joint Lubricant
Chemical Formula: 88-6
Manufacturer: JTM Products, Inc., 31025 Carter Street, Solon, OH 44139, Phone (440) 287-2302, FAX (440) 287-3095
(CHEM-TEL 24-hour emergency: (800) 255-3924)
Section 2 - Composition / Information on Ingredients
Proprietary blend of soap [CAS#61790-44-1], glycol [CAS#57-55-6]and filler [CAS#12001-26-2].
revised February 2005 - John Cahoon
Section 3 - Hazards Identification
Emergency Overview
Potential Health Effects
Primary Entry Routes: Not Hazardous
Carcinogenicity: IARC, NTP, and OSHA do not list the ingredients in Fastite 27-A Pipe Joint Lubricant as
carcinogens.
HMIS
H 1
0
F
0
R
†
PPE
†Sec. 8
Section 4 - First Aid Measures
Eye Contact: Flush with copious volumes of water for 15 minutes while holding eyelids open.
Skin Contact: Wash with water.
If irritation persists, call a physician.
Section 5 - Fire-Fighting Measures
Flash Point: >220 °F (>104 °C)
LEL: NA
NFPA
Flash Point Method: NA, contains water
UEL: NA
0
Autoignition Temperature: NA
Flammability Classification: 0
0
1
Extinguishing Media: Water, water fog, alcohol foam, carbon dioxide or dry chemical are all suitable.
—
Unusual Fire or Explosion Hazards: None
Hazardous Combustion Products: None
Fire-Fighting Instructions: Do not release runoff from fire control methods to sewers or waterways.
Fire-Fighting Equipment: Because fire may produce toxic thermal decomposition products, wear a self-contained breathing
apparatus (SCBA) with a full facepiece operated in pressure-demand or positive-pressure mode.
Section 6 - Accidental Release Measures
Spill /Leak Procedures: This product is a biodegradable soap.
Containment: For large spills, dike far ahead of spill for later disposal.
Cleanup: Place the bulk of any spilled material into drums, then rinse any remaining material to sewage treatment facility, in
accordance with any applicable regulations.
Regulatory Requirements: Follow applicable OSHA regulations (29 CFR 1910.120).
Section 7 - Handling and Storage
Handling Precautions: No special precautions are required.
Storage Requirements: No special precautions are required.
Regulatory Requirements: No known regulatory requirement for handling and storage.
Section 8 - Exposure Controls / Personal Protection
Engineering Controls:
Ventilation: Provide general or local exhaust ventilation systems.
Administrative Controls:
Respiratory Protection: If respirators are used, OSHA requires a written respiratory protection program that includes at least:
medical certification, training, fit-testing, periodic environmental monitoring, maintenance, inspection, cleaning, and
convenient, sanitary storage areas.
Page 1 of 2
"