Network Time Display0 pages
Network Time Displays
Features
Digital Clock Automaticall=y Synchronizes with NTP servers over Ethernet Network
0.5”, 3.2” or 5” display sizes
Remote network management
Time Zone and Daylight Savings support
Multiple colors
Optional Network Time Server version with built-in GPS receiver
Optional built-in IRIG B time code reader
Brandywine’s family of Network Time Displays provides
maintenance free display of time. They receive their time
over a standard computer network, by interrogating a
network time server.
The Network Time Displays use the Internet standard for
time transmission, Network Time Protocol (NTP) to
synchronize themselves automatically to a network time
server.
Using existing standard network cabling and makes
installation of the Network Time Displays simple and
straightforward. No dedicated wiring is required when
using the Ethernet as the synchronizing source.
Once connected to the network, the displays can
automatically receive a network address using DHCP
protocol. Software utilities are provided that will
automatically identify any Network Time Displays on the
network, to allow configuration from a single PC. Individual
displays have the capability of displaying their own
address by means of a rear panel push button, which can
also be used to set the display brightness.
Time can be displayed as either 12 hour or 24 hour time
format. A built-in web browser allows the user to control
which time source will be used, time zone and daylight
savings set-up and display brightness. Full password
protection for changing settings is provided on all units.
All displays include an RS232/422 broadcast time port,
with user specified time message for synchronizing
external equipment. All displays may also be