Mass measurement: OG-VT0 pages
Oval Wheel Meter Innovations – from 1932 until today
Mass measurement: OG-VT
• Measurement of Mass
• Accuracy 0,3% of actual value
• Display of Mass, Flow and Temperature
• Current and Impulse output
Description
Mass meters of Bopp & Reuther are based on the decades proven oval
wheel meters with intelligent signal processing. The electronics converts
the measured volume under consideration of the current fluid
temperature and the associated actual density into a mass signal. For
further signal processing a scalable pulse output and a 4-20mA current
output are available for the actual value.
The OG-VT Series is used for precise measurement of liquified gases,
deionized water, acids, alkalis, fats, alcohols, fuels, oils, solvents,
paints, coatings, dispersions, condensation polymers, adhesives, etc.
Electronics:
-MFE-3:
Pulse output, current output 4-20mA,
PT 1000 Input, Memory for density and correction factor
current loop powered
-UR06:
universal computer with optional Ethernet interface
Input for two transducers, OIML approval
Temperature input, 10-point linearization,
2x current inputs for additional sensors
(density, temperature)
Technische Daten
Accuracy*
< ± 0,3% of actual value
Special calibration ± 0,1% on request
Repeatability
0,02% of actual value
Liquid temperature
-25° to + 90°
C
C,
High temperature version on request
Ambient temp.
-20° to +70°
C
C
Process connection
Flange DIN / ANSI
OF -
03 VT
Size
DN
15
Pulse output,
Universal electronic MFE-3,
Flow computer UR06
OF -
06 VT
Electronics
OF -
Output
Pulse, current output 4-20mA
OG -
Material
Housing: Stainless Steel, Cast Steel,
Cast Iron
Oval wheels:Stainless Steel, Cast Iron
Special tooth profile for high viscosities
Protection
IP 54
* at reference conditions > 0,3-1,5mPas
Measuring range
Qmin
Qmax
6
120 kg/h
15
12
250 kg/h
1 VT
15
30
600 kg/h
5 VT
25
0,15
3 t/h
OG - 10 VT
25
0,3
6 t/h
OG - 50 VT
50
0,9
18 t/h
OG - 115 VT
50
1,8
40 t/h
OG - 400 VT
100
3,6
72 t/h
"