CYCLONE SEPARATOR Z 20N - 3750 pages

Cyclone separator Z 20N to Z 375

Z 20N – Z 183N

Z 275 – Z 375

LAYOUT
The cyclone separator is ideally suited as a
bulk water separator when located before a
refrigerant dryer or directly after the compressor
if no air receiver is used; or if it is placed at a
distance; or if the compressed air supply pipe
is mounted vertically.

MINIMAL PRESSURE LOSS
There is a minimal pressure loss across a cyclone
separator, which means that operating pressure
is always optimised – saving energy.

EFFICIENCY
Apart from the drain, the cyclone separator
operates wear-free because there are no
moving parts which means increased output
of the compressed air-treatment system.

BEKOMAT
An electronically level-controlled, loss-free,
Bekomat condensate drain can be tted as
an option assuring increased compressed
air treatment safety.

Operating principle
The cyclone separator works according
to the mass inertia principle. It consists
of a vortex cartridge and a reservoir.
The vortex cartridge induces the compressed air into rotary movement.
Solid and liquid components in the air
are forced against the inside walls of
the separator by their own mass inertia.
This causes heavy particles of dirt and
water to separate and ow into the
collection reservoir.