The new bench top analyzer for biogas:

The BenchOne Biogas a laboratory scale
bench top analyzer for biogas. It measures
CO2 as well as CH4 in real-time. Just connect
your vessel or fermenter to the inlet of this
biogas analyzer, connect the off gas line and
start the measurement. In the BenchOne
Biogas there are two IR sensors (one for
methane and one for carbon dioxide) and also
one pressure sensor to compensate pressure
fluctuations automatically. This reliable device
makes the gas analysis for the biogas process
affordable and easy. The measuring range of
this biogas analyzer is 0-50% Vol.% for CO2
and 0-100 Vol.% for CH4 and it has no
interferences to humidity and hydrogen
sulphide. Due to the internal heated piping,
made of stainless steel, there will not be a
corrosion inside the apparatus. You can see
the actuals measured values at the displays.
The BenchOne Biogas can be connect via
analog outputs as well as via RS232 and RS485
for example to a process control system or an
analysis and monitoring software for
bioprocesses like the new BlueVis. As an
active sampling with a pump is not needed,
the BenchOne Biogas offers an independent
of flow and reliable gas analysis, especially for
fermenters with low gas volume. You do not
need a minimum gas flow and the gas also
does not need special treatment (no drying
needed).

Data output: 2 displays, RS232, RS485, 2x 4-20
mA, USB
Mechanical connection: Swagelok for 6mm outer
diameter (OD)
Mesuring range: 0-50% Vol.% for CO2 and 0-100
Vol.% for CH4
Your advantages:
•
No minimum gas flow needed
•
No pumps
•
Pressure and temperatue compensated
•
Easiest installation
•
CO2 and CH4 measurement in one device
•
2 Displays
•
No extra gas cooler/dryer
•
RS485/RS232

The BenchOne Biogas is the most convenient
bench top tool for the analysis of biogas in the
lab.

BlueSens gas sensor GmbH
Snirgelskamp 25 – 45699 Herten (Germany)
Phone +49 2366 4995-500 Fax: +49 2366 4995-599
E-Mail: info@BlueSens.de

BlueSens.com