1kVA Compact, Heavy-duty Pure Sine Wave Inverters0 pages
1000VA Compact, Heavy Duty, Industrial Quality Sine Wave Inverter
CSI 1K-U5515 Series
•
•
•
•
•
•
Sinusoidal output voltage
Rugged, industrial quality
Cooling by high quality internal fan
Compact construction
Full electronic protection
Cost-effective construction
This rugged, modular DC/AC inverter system uses a field proven microprocessor controlled high frequency PWM technology to generate
1000VA output power with pure sine wave output voltage. The inverter is built with two internal power modules. The DC/DC input stage
boosts the DC voltage which feeds the DC/AC inverter to generate the required AC output. The input and output have a dual stage high
performance filter which ensures low noise. The high frequency conversion enables a compact construction, low weight and high
efficiency. This compact version of the CSI 1K measures 5” x 5” x 15.6”. The innovative mechanical construction significantly reduces the
cost of production and price. This inverter design is only available with terminal blocks for the input and output. Cooling is by a high
quality built-in fan, which draws air into the unit and the exhaust exits at the terminal side of the unit. Full electronic protection,
generous design headroom and the exclusive use of components with established reliability contribute to high MTBF. The unit is
manufactured at our plant under strict quality control.
SPECIFICATIONS
Input Voltage
48Vdc (42‐56V)
110Vdc (90‐130V)
125Vdc (106‐145V)
Please contact factory for other
input requirements
Input Protection
Inrush current limiting
Varistors
Internal safety fuse
Lower voltage than the specified
minimum input will not damage
the unit
Isolation
1700Vdc input to chassis/output
or corresponding to the voltage
requirements
Output neutral is connected to
the chassis internally
Floating output as option
Standards
Designed to meet
C22.2 No. 107.1 - 01,
UL 458 and EN60950-1
EMI
EN 55022 Class A with margins
Terminal Block Pin-out
Output Voltage
115Vac /8.7Arms continuous
at 60Hz or 400Hz; or
230Vac/ 4.3Arms continuous
at 50Hz
Output neutral is connected to
the chassis internally
Isolated floating output optional
Other outputs available on request
Output Wave Form
Sinusoidal
Total Harmonic Distortion
Less than 5% at full load
Line/Load Regulation
Better than ± 6% from no load
to full load.
± 2% load regulation option is
available
Load Crest Factor
2 at 90% load
Output Noise
High frequency ripple is less
than 100mVrms (20MHz BW)
Output Overload Protection
Current limiting with short circuit
protection
Thermal shutdown with automatic
recovery in case of insufficient
cooling
Output Overvoltage Protection
140Vac (for 115Vac output) or
280Vac (for 230Vac output) by
internal supply voltage limiting
Efficiency
Input voltage dependent
Typically 80% at full load
Operating Temperature Range
0o C to +50°C for full specification
Extended temperature ranges
available
Temperature Drift
0.05% per °C over operating
temperature range
Cooling
High quality built-in fan
draws air into the unit
Environmental Protection
Basic ruggedizing
Full ruggedizing and conformal
coating as option
Humidity
5 - 95% non-condensing
MTBF
Min. 95,000 hours at 45ºC
Demonstrated MTBF is
significantly higher
Fan excluded
Indicators
Green high intensity output ON LED
on the internal DC bus visible
through the perforation on the
terminal side
Control Input
None
Remote shutdown as option
Alarm Output
None
Optional output fail alarm (Form C)
Package/Dimensions (W x H x D)
U5515: 127 x 127 x 397 mm
(5” x 5” x 15.6”) including terminals
and fans
Four M5 inserts on bottom surface
for mounting, or mounting brackets
(as on photo).
Weight
Approx. 5.8 kg (12.8 lb)
Connections
Input: 3-pole terminal block
Output: 12-pole terminal block
RoHS Compliance
Fully compliant
Warranty
Two years subject to application
within good engineering practice.
Please note that the above specifications set only generic guidelines for the design.
Customizing and enhancements are possible. Please contact us with your specific requirements.
Designer and manufacturer of quality ac-dc power supplies and battery chargers, converters, inverters,
dc-output UPS systems, complete rack mount systems and DC-input fluorescent lamp inverters since 1982.
ABSOPULSE ELECTRONICS LTD
110 Walgreen Road, Ottawa. Ontario. K0A 1L0. CANADA
Tel: +1-613-836-3511 | Fax: +1-613-836-7488
E-mail: absopulse@absopulse.com | http://www.absopulse.com
For more information, please see:
October 31, 2013/TS/ CL
http://www.absopulse.com/Absopulse_SineWaveConverters.php
Made in Canada
"