Wide input range DC-DC converters0 pages
120W, 90Vdc – 350Vdc Wide Input Range, Industrial Quality DC/DC Converter
DPF 120-FT Series
•
•
•
•
•
Wide input range
Rugged Industrial quality
Field proven design
Conduction/convection cooling
Full electronic protection
This rugged, industrial quality, DC/DC converter uses our field-proven PFC 150 dual conversion technology and delivers
up to 120W output power. The converter offers a wide DC-input voltage range of 90Vdc to 350Vdc. Cooling is via baseplate to a heat-sinking surface and by natural convection. The unit has a robust mechanical construction and all
components are conformal coated. Full electronic protection, low component count, large design headroom, and the
use of components with established reliability result in a high MTBF. The unit is manufactured at our plant under strict
quality control.
SPECIFICATIONS
Input Voltage
90Vdc - 350Vdc input range
Other inputs available on request
Input Protection
Inrush current limiting
Varistors
Reverse polarity protection
Internal safety fuse
Lower voltage than the specified
minimum input will not damage
the unit
Isolation
2250VDC input to chassis
4300VDC input to output;
8mm spacing
Corresponding to output voltage,
min 700V
Standards
Designed to meet EN60950-1
and corresponding UL and CSA
standards
EMI
EN 55022 Class A with margins
Switching Frequency
Input stage: 50kHz-150kHz
Output stage: 47kHz ± 3kHz
Hold-Up Time
Min. 5msec at any input for
5% drop of the output voltage
Output Voltage
12V, 24V, 48V, 110V or 125Vdc
Output is floating; either
terminal can be grounded
Other outputs available on
request
Redundancy Diode
Not installed on standard
versions
Line/Load Regulation
± 1% combined from zero load
to full load
Dynamic Response
Max 5% voltage deviation for
10% to 50% load step, with
better than 1msec recovery
time
Output Ripple/Noise
Better than 0.2% rms or 1%
of the output voltage peakto-peak (20MHz BW)
Output Overload Protection
Rectangular current limiting
with short-circuit protection
(hiccup type)
Thermal shutdown in case of
insufficient cooling (selfresetting)
Output Overvoltage Protection
Double regulator loop. Second
loop completely stable and
independent of main regulator
loop.
Transzorb clamp
Efficiency
Typ. 80% at full load depending
on input/output configuration
Indicators
None on standard version
Available on request
Operating Temperature Range
0ºC to 50ºC for full specification
Extended temperature range
available
Control Input
None
Temperature Drift
0.03% per ºC over operating
temperature range
Cooling
Conduction to customer
heat-sink or chassis and natural
convection
Environmental Protection
Basic ruggedizing
Conformal coating
Heavy ruggedizing available on
request
Shock/Vibration
IEC 61373 Cat 1 A&B
Humidity
5-95% non-condensing
MTBF
120,000 hours @ 45 oC
Demonstrated MTBF is
significantly higher
Alarm Output
None
Package / Dimensions (W x H x L)
F1: 114 x 51 x 201 mm
(4.5" x 2" x 7.9") including terminal
block and flanges.
Mounting holes are clear.
Weight
0.8 kg (1.8 lb)
Connections
9 pole screw type terminal block,
3/8” spacing
RoHS Compliance
Fully compliant
Warranty
Two years subject to application
within good engineering practice
Terminal Block Pin-Out
Please note that ABSOPULSE power supplies are designed and built to customer specifications. The specifications on this data sheet are generic and
will vary depending on input/output configuration and other customer requirements. Generic specifications are subject to change.
Designer and manufacturer of quality converters, inverters, UPS systems, complete rack mount systems
and DC-input fluorescent lamp inverters since 1982. Custom or standard. ABSOPULSE is a BABT-approved Facility
ABSOPULSE ELECTRONICS LTD.
110 Walgreen Road, Ottawa. Ontario | K0A 1L0 | CANADA
Tel: +1-613-836-3511 | Fax: +1-613-836-7488
E-mail: absopulse@absopulse.com | http://www.absopulse.com
For more information, please see:
May 14, 2014/TS/CL
http://www.absopulse.com/Absopulse_DC_DC_Converters.php
Made in Canada
"