4.5kW Rugged, Industrial Quality Rack-mount AC/DC Power System with 1.5kW Plug-in Modules PFC 4K5-3U19 Series0 pages
4.5kW Rugged, Industrial Quality Rack-mount AC/DC Power System with 1.5kW Plug-in Modules
PFC 4K5-3U19 Series
•
•
•
•
•
•
•
Electronic power factor correction (PFC)
Rugged industrial quality
Up to 4500W per 19” shelf
Full electronic protection
Fan cooling
Field-proven design
PFC 1K5 module: 5 x 5 x 12.5”
Hot swappable, N+1 redundant
(depth excludes connector)
3U x 19” stainless steel cradle with 3 x PFC 1K5 modules
This modular, industrial quality AC/DC power supply system with power factor corrected input is built with three 1500W, PFC 1K5
power supply modules assembled on a 3U x 19” stainless steel cradle (CR 3U-3). The PFC 1K5 units are equipped with connectors
which allow hot insertion. A built-in redundancy diode in each module allows for parallel connection and N+1 redundant operation.
The system delivers a maximum of 4500W or 3000W with N+1 redundancy. The PFC 1K5 modules are based on field-proven
topology. They have large design headroom and are rated for operation over the specified temperature range without de-rating.
Each module is cooled by a high quality built-in fan. Full electronic protection and the use of components with established reliability
results in a high demonstrated MTBF confirmed by a track record in numerous applications. The system is manufactured at our
plant under strict quality control.
SPECIFICATIONS
Input Voltage per PFC1K5 Module
95-264Vac (Universal) 47… 63Hz
Input Current: 18Arms max.
Power Factor is better than 0.97 at
full load for the entire input range.
Meets EN61000-3-2 and
EN61000-3-12
Input Protection
On each module:
Inrush current limiting
Varistor
Internal safety fuse
Lower voltage than the specified
minimum input will not damage
the unit
Isolation
2250VDC input to chassis
4300VDC input to output
8mm spacing
500VDC output to chassis
Standards
Designed to meet EN60950-1
and related standards.
EMI
EN 55022 Class A with margins
Output Voltage/Current per Module
24V/60A, 48V/30A, 54V/27A
110V/13A or 125Vdc/12A per
module with fan cooling
Output is floating, either terminal
can be grounded
Max output 1500W per module
Max output 4500W per shelf
Consult factory for other outputs
Efficiency
Output voltage dependent
Typically 80% at full load
Indicators
Diagnostic Output ON LED visible
through the rear cooling slots
Operating Temperature
0ºC to 50ºC for full specification
Extended temperature range
available on request
Controls
None
Options available
Redundancy Diode
Installed on each plug-in module
Hot insertion allowed
Temperature Drift
0.03% per o C over operating
temperature range
Line/Load Regulation
±2% combined from zero load
to full load including redundancy
diode
Cooling
Each module has one
high quality built in fan
Dynamic Response
Max 5% voltage deviation for 10%
to 50% load step, with better than
1msec recovery time
Environmental Protection
Basic ruggedizing
Heavy ruggedizing and
conformal coating as option
Output Ripple/Noise
Better than 1% of output voltage
peak to peak or 0.2% RMS of the
output voltage (20MHz BW)
Shock/Vibration
IEC 61373 Cat 1 A&B
Hold-Up Time
Minimum 10ms at full load for 5%
drop of output voltage at nominal
input
Overload Protection
Rectangular current limiting with
short-circuit protection (no hiccup)
Thermal shutdown on each module
in case of insufficient cooling (selfresetting)
Switching Frequency per Module
100kHz input section
55kHz output section
Output Overvoltage Protection
Second regulator loop, completely
stable and independent of main
regulator loop
Humidity
5-95% non-condensing
MTBF
120,000 hours @45ºC
per module.
Demonstrated MTBF is
significantly higher.
Fans are not included.
Alarm Output
Module fail alarm Form C on each
module
Package/Dimensions (H x W x D)
Stainless steel rack-mount cradle,
CR 3U-3: 3U x 19” x 12.4”
PFC 1K5 modules in M5512 chassis:
127 x 127 x 460mm
(5.0” x 5.0” x 18.1”) including
Anderson SB175A connectors
Weight
3U system with 3x PFC1K5 modules:
20kg (44 lbs)
Connections
Input: IEC receptacle
Output: Anderson Connector
SB175A
Alarm: Phoenix MSTBA 2.5/3-G
on each module
RoHS Compliance
Fully compliant
Warranty
Two years subject to application
within good engineer
Enhancements to these general specifications and customizing can be accommodated upon request. Specifications are subject to change.
Designer and manufacturer of quality converters, inverters, UPS systems, complete rack-mount systems
and DC-input fluorescent lamp inverters since 1982. Custom or standard. Absopulse is a BABT-approved Facility
ABSOPULSE ELECTRONICS LTD
110 Walgreen Road, Ottawa. Ontario. K0A 1L0. CANADA
Tel: +1-613-836-3511 | Fax: +1-613-836-7488
E-mail: absopulse@absopulse.com | http://www.absopulse.com
Binder Section: AC/DC Power Supplies
http://www.absopulse.com/Absopulse_powersystems.php
April 17, 2013/TS/CL
Made in Canada
"