IPC@CHIP® SC123 / SC1430 pages
Information Sheet: IPC@CHIP® SC123 / SC143
Software
Like the well-established SC11/SC13, the
®
IPC@CHIP SC123 and SC143 products are
®
equipped with the IPC@CHIP -RTOS preinstalled
real-time/multi-tasking operating system and
downwards compatible API interface, and are
therefore software compatible with SC11 and
SC13. Existing SC1x applications can be reused
after recompiling with the new Paradigm C/C++
compiler contained in the Development Kit.
The SC123/SC143 is a further addition to the
®
IPC@CHIP product series, offering more performance, more memory and more functions whilst
still maintaining full software compatibility with
existing SC11 and SC13 controllers.
The following software functions are also integrated in the RTOS of the SC123/SC143:
All the critical and well-established hardware functions and interfaces of SC11/SC13 are retained on
the SC123/SC143, and have been enhanced with
a number of additional key functions.
SC123
SC143
IPv6 (in addition to IPv4)
Security protocol SSL, SSH and IPSec
PPPoE
API for CAN controller (CANopen stack available as option)
API for elementary USB slave and host functions, support for USB storage devices (USB
sticks)
The new BGA design supports larger unit volumes
in all aspects of industrial control and communication.
Only one RTOS version with all available functions (incl. PPP and SNMP)
IEC 61131-3 CODESYS SP runtime system
Design
BGA177, 25x25x5mm
CPU
SC186-EX / 96 MHz
RAM (free)
8 MByte (approx. 7 MB)
Flash memory
(free as Flash
disk)
2 MByte
(approx. 1 MB)
Ethernet
1 x 10/100BaseT / PHY, 1 x MII
IEC 61850Li (Lite implementation) integrated
Serial
4 x TTL
CAN
2 x CAN 2.0B master / slave,
1 Mbit/s
Other interfaces
USB1.1, I2C, SPI
I/O
31 freely prog. PIO pins (GPIO),
3 x IRQ, 2 x external DMA,
2 timer inputs/outputs, 24-bit
address bus, 16-bit data bus
IEC 61850 is a standard for utility automation systems including Smart Grids. It provides a comprehensive data models, communication services, and
device and system configuration language (SCL).
All models for protection, monitoring and automation for substations in transmission and distribution, monitoring of power quality, hydro power
plants, wind turbines, decentralized energy resources like photo voltaic, combined heat and
power, diesel gensets, or batteries can be implemented and configured by SCL files.
Operating
voltage
3.3V
Heat dissipation
typ. 1 Watt
Temp. range
-25 to 85 °C
8 MByte
(approx. 7
MB)
The runtime system is derived from CODESYS SP
2.3 and is available as C library, which makes it
easy to implement individual adaptations and enhancements. Besides the extended program
memory for CODESYS-projects the runtime system contains as well a CANopen-stack and supports all 4 serial interfaces.
The IEC-61850-compliant PIS-10 software stack
can be launched as a client and as a server. Both
applications can coexist at the same time on the
IPC@CHIP®. The stack supports IEC 61850 services including GOOSE and sampled values.
More information can be obtained from our website
at http://www.beck-ipc.com
IS_SC1x3_EN_V12.PDF
© Copyright Beck IPC GmbH
Beck IPC GmbH
Nauborner Straße 184
35578 Wetzlar/Germany
E-mail: info@beck-ipc.com
www.beck-ipc.com