Series 220PVCS
PVC Insert Flow Sensor
The Data Industrial® Series 220 PVCS flow sensor by Badger Meter
is an insertion style flow sensor constructed of non-metallic
materials for all wetted parts. These sensors are designed for
service in corrosive liquids. The metallic trim, in non-wetted areas,
is 316 stainless steel. The sensor mounts in a 2 inch NPT thread
and may be attached to the pipe with a saddle or other types of
mounting hardware.
The Series 220 PVCS sensor features a six bladed impeller
design with a proprietary, non-magnetic sensing mechanism.
The impeller shape coupled with the absence of magnetic drag
provides consistent accuracy and repeatability throughout the
flow range of the sensor. As the liquid turns the impeller, a low
impedance signal is transmitted with a frequency proportional to
the flow rate. This signal can travel up to 2000 feet between the
sensor and the display unit without the need for amplification. The
sensor is supplied with 20 feet of shielded two-wire cable.

Dimensions

STYLE
Standard Flow
MATERIAL
Brass
Stainless Steel
PVC Sleeve w/Stainless Steel Trim
SIZE
Insert Style for pipe sizes 3" and up
ELECTRONINCS HOUSING
PPS
ELECTRONICS
CSA Approved
Standard Flow (STANDARD)
IR-Irrigation
O-RING
Viton®
EPDM (STANDARD)
Buna N
SHAFT
Zirconia Ceramic
Tungsten Carbide (STANDARD)
316 Stainless Steel
IMPELLER
Nylon (STANDARD)
Tefzel®
BEARING
UHMWPE (STANDARD)
Tefzel®
Teflon®

Example: 2

20

BR

00

0

5

-

1

2

1

1

20
BR
SS
PVS
00
0
4
5
6
0
1
8
0
2
6
1
2
1
2
3

220PVCS Ordering Matrix

DTB-004-03-EN (August 2012)
Rev. 3

Technical Brief