HIT230F for tests on plastics0 pages
Product Information
Drop Weight Tester HIT230F for tests on plastics
The drop weight tester HIT230F has been developed in
close cooperation with our customers. This has allowed
the requirements of both research and development
and quality assurance to be fulfilled. It is designed for
the performance of multiaxial impact tests on plastics.
The range of applications includes material characterisation of standard specimens, established Standards of
research and development.
PI 682 2.0712
Advantages/Characteristics
•t Simple and safe operation
•t Good accessibililty to the test area
•t Flexible design with simple interchanging of test
accessories
•t Intelligent protection system – operation of a safety
door is not necessary to place a specimen in the
tester
•t Innovative specimen clamping system enables fast
and simple gripping of the specimen
•t Testing in a wide temperature range is possible
without installing an expensive temperature chamber
in the test frame
•t Inexpensive, external temperature conditioning and/
or existing equipment can be used
•t The innovative design of the entire force
measurement chain leads to a low noise
measurement data. This allows a reliable
determination of the materials characteristics to be
achieved from the force-deformation curve
•t High specimen throughput due to ergonomic
specimen clamping and protective unit.
•t Automatic lifting of the drop weight with stepless
adjustment of the height from 0.1 m to 1 m
•t High test data acquisition rate (4 MHz) with
simultaneous high resolution (16 bit)