Thermocouple Series0 pages

Tf

TAISUO

ZHEJIANG TAISUO TECHNOLOGY CO.,LTD

Sales:+86 574 62505590

F a x:+86 574 62506589

ITEM:TS 01 SERIES/TS 02 SERIES

TheTS02series bolt-down thermocouple uses #20

________ ____- gage (0.032") solid conductors and is available

O ———— m wit[1 varjous insulation materials: fiberglass or

Teflon. Four standard eyelet sizes are available:

#6 (0.146 hole), #8 (0.170), #10 (0.195 hole)

i — and 1/4 inch (0.260 hole). In addition to bolting

the thermocouple to a wall, it can also be hooked

to a traveling conveyor or hung from a ceiling.

Available in thermocouple calibrations - Types J, T, K, and E. length of the TS 02series

unit is 36 inches, longer in length as well as, stainless steel over braid and various

terminations are also available to suit your particular requirement. TheTS 01 series

washer thermocouples are designed to measure true average temperature of the washer.

Conduction errors are eliminated by welding elements at 180 degrees.

TS 01 Series

NOTES:

• If lead lengths longer than

36 inches are desired,

specify length required.

• Standard wire insulation is

fiberglass, which is good

to 700 degrees Fahrenheit

operation.

• For other insulation consult

factory.

• When ordering specify part

number by selecting code

from each column A through

F then add length in inches.

Example: TS 02 -2-1-2-2-3-D-120

specifies a type K Teflon

insulated, stainless steel

over braid, ungrounded,

spade lug unit with a 1/4

inch clearance hole, 120

inches long.

• Nextel insulation available

for type K only.

OD

Washer Thermocouple

36" if standard

TS 02 Series

Bolt Down Thermocouple

2-1/2' 39' leads standard

E)dct

TS 01 Series

TS 02Series

Choose One Option From Each Column

Http://www.taisuo.com E-mail:tst@taisuo. com

TAISUO

ITEMTS 03 SERIES

Our line of hose clamp thermocouples consists of three basic

styles which vary by the addition of a stem and/or stainless steel

overbraid.

Style 1 has an 1/8 inch O.D. by six inches long stainless steel

sheath. The thermocouple wires inside the sheath are insulated

with a high temperature mineral oxide insulation. Standard

units have a grounded junction which is brazed to the stainless

steel pipe clamp. Two versions of the attachment are available:

tangential and perpendicular. Unless otherwise specified, we will

furnish the tangential style. The style 1 units have five feet of

fiberglass insulated extension wire connected to the stainless steel sheath.

Style 2 the same as Style 1, except that the stainless steel sheath is deleted. The fiberglass

insulated thermocouple wires are welded directly to the stainless steel pipe clamp.

Style 3 the same as style 2, except that the fiberglass insulated thermocouple wires have a

stainless steel overbraid which reduces stray, unwanted electromagnetic pickup and increases

lead wire durability.

NOTES:

All units come with five feet of

fiberglass insulated extension leads other

materials are also available.

All thermocouples are mounted in a

tangential style as shown above, unless a

perpendicular style is specified.

All thermocouples are grounded to hose

clamp for fast response.

All units are available in thermocouple types

T E, J, K, N and PT100

D6 Series

Various terminations are available, contact

factory.

When ordering, specify part number and

thermocouple type

Example.: TS03-5-J

To specify (U - ungrounded) junction add the

suffix U to the part number.

To specify (P - perpendicular) style versus

tangential add suffix P to part number.

Specifications

Http://www.taisuo.com E-mail:tst@taisuo. com