Core Drill - CD120 pages
Core Drill
Features and Benefits
The Stanley CD12 Core Drill is well
suited for drilling concrete, masonry
and asphalt materials. It is operated
mounted in a optional drill stand. The
CD12 maintains speed regardless of
drill load improving the life of the bits.
The CD12 has a three-speed gearbox.
This provides a speed selection to
match the best speeds for the range
of drill bits. Changing speeds is easily
done with the speed selector on the
drill. The gearbox is equipped with a
clutch to protect the gear set from
overload while delivering torque
sufficient for the larger bits.
The ON/OFF directional spool valve is
detented to stay ON to reduce
operator fatigue.
SPECIFICATIONS
CD12 08-2004 Stanley Hydraulic Tools
3810 S.E. Naef Road
Milwaukie, Oregon 97267
Tel 503•659•5660
Fax 503•652•1780
ITEM U.S.A. METRIC
CAPACITY 5/8 to 12 in. Bits 15 to 300 mm Bits
PERFORMANCE 380, 900 and 1800 rpm
FLOW RANGE 4-6 gpm 15-23 lpm
PRESSURE 1000 - 2000 psi 69 - 140 bar
SPINDLE CONNECTION 1-1/4 UNC male, 1/2 UNC female
SYSTEM TYPE Open Center
WEIGHT 18.7 lbs 8.5 kg
LENGTH 19.3 in. 490 mm
MAX WATER PRESSURE 60 psi 4 bar
CONNECTION 3/8 in. Flush-Face Quick Disconnect Couplers
WATER CONNECTION Gardena Quick Connect Coupler
HOSE WHIPS Yes
ANCHOR STAND Yes
Water can be delivered either from a
hydrant connection or from the 4-
gallon pressure tank accessory. The
water connection on the CD12 is fitted
with a valve so the water can be
controlled at the drill.
A drilling aid is included to assist in
starting freehand drilling without walk.
Once the drill bit is started, the drilling
aid can be moved out of the way.
The drill stand can be adjusted to
enable drilling holes at any angle from
perpendicular to 45 degrees. The drill
stand can be anchored to the material
to be drilled by setting an anchor
screw or by using a vacuum pump.
The drill stand has leveling screws to
CD12
set the stand solidly on the surface to
be drilled.
Wrenches are included for loosening
and removing drill bits.
A model is available with a spacer block
to increase the drill capacity to 14-inch
diameter bits.
www.stanley-hydraulic-tools.com
CD12 Shown with Anchor Stand
and Optional Core Bit