عضویت 
ورود اعضا
راهنمای خرید
Humidification chambers & breathing masks0 pages
Assembling and printing system for
humidification chambers and breathing masks
This machine concept was developed for In-Line production of humidification chambers and breathing
masks. The machine is build for swaging and printing of the humidification chambers.
The single parts as: bottom, seal, floater and chamber are assembled and loaded into the jig of the servo –
linear transport system.
In the first station the bottom will be swaged. In the next station the chambers are positioned in such a way
that the print comes to the correct position.
The pad printing machine is equipped with two sealed inkpots and with one automatic pad cleaning unit.
In the first printing station the chambers are printed at the top and in the second station the chamber are
turned by 90° and the printed on the side.
After printing the chambers goes back to the upright position and the linear-slide goes back with the
chamber to the start position.
______________________________________________________________________________________
ST Drucksysteme, Blattenweg 1, CH-8235 Lohn / Switzerland / Tel: 052 670 1434, Fax: 052 670 1436
http//www.stsprint.com / http//www.stds.ch / E-Mail: info@stds.ch
