Test adapter0 pages

fest adapters System Example Adapter Electric Drill » via standardized plug and socket connections all of the test cages and test adapters we supply to the customer are interchangeable » single function adapters are manually adjustable via carriage and limit switch, this means variants can be tested also a pneumatic clamping unit for defined test positions » screws for the enclosure are pneumatically contacted with spring contact pins in 4-wire technique -with this method a missing screw can be pin pointed » the gear housing is pneumatically contacted with two carbide tipped rotary contact pins -this way coats of lacquer can be penetrated » the pole shoe is contacted with carbide tipped spring contact pins through an opening in the enclosure » the contact control in the armature and the pole shoe is made via current recognition contacts » the switching on or off of the DUT is solved pneumatically by means of a special adapter -(the ON switch must not be locked after having been activated) » the number of revolutions and the sense of rotation is performed via a live spindle with integrated pinion and special sensor » all PASS DUTs are identified at their plastic enclosure with a hot forming punch -these forming punches can be exchanged manually electric drill rotor Rotor, Hand Circular Saw The pictures shown represent a small selection of the successfully solved tasks which were set us. hand circular saw Headquarter: Blttercker 18 I D-74523 Schwࠠbisch Hall Phone +49 7907 878-0 I Fax +49 7907 878-99 info@spselectronic.com I www.spselectronic.com Settlement North: BoschstraRe 15 I D-49767 Twist Phone +49 5936 91815-0 Fax +49 5936 91815-99