Spi-Frame Press 46000 pages
Spi-Frame Press™ 4600
Aligns frame pieces and applies proper force
to ensure accurate frame assembly
T
he Spi-Frame Press™ 4600 provides a photovoltaic
production frame with the capability to install edge
sealant and frames on module laminates. The frame perimeter
consists of four frame members and four corner keys that are
pressed together using joystick hydraulic controls. The frame
provides the means for mounting the laminated solar cells and
protects the glass edges from the hazards of the environment.
Throughput of
15 modules
per hour
The laminate rests on a rotating vacuum table that allows an
operator to apply sealant, such as foam tape or silicone, to the
module edges without changing position. The table rotates
360° and a pneumatically controlled brake locks the rotation
when sealant is applied to each side of the module.
A venturi vacuum
pump provides vacuum
to four large vacuum cups
to clamp the module securely to the rotating table during
sealing. The table lifts up for sealing and lowers for pressing.
The vacuum turns off for pressing to allow free movement
of the laminate and frame.
Compressed air provides power for the table lift, the table
brake, and the venturi vacuum pump. A hydraulic pump and
two self-aligning cylinders press the frame between a push
bar and a rigid back stop.
Aligns frame piece
and ensures proper
frame assembly
F E AT U R E S A N D B E N E F I T S
Includes
Rotary table for edge sealing application
Vacuum system that holds modules securely in place
Corner key press, crimping tool, and tape dispenser
Rugged design
Prevents mishandling of module while framing
Hydraulic pump and cylinders for pressing corner keys into frames
Hard plastic surfaces prevent damage to the frame and laminate
w w w.spiresolar.com
©2014 Spire Corporation. All rights reserved. Specifications are subject to change without notice.
Rev D 6/14
"