SpinTek ST-II-25 Tubular Membrane Systems0 pages
SpinTek ST-II-25
Rotary Membrane System
for Ultra- and Microfiltration
General
The SpinTek™ ST-II-25 is a compact cross flow
membrane system that utilizes the unique SpinTek
process of centrifugal action and shear force to
prevent membrane fouling common to conventional
systems. The ST-II-25 has wide open channels,
uninhibited by mesh type turbulence promoters,
allowing the system to process a wide variety of
viscous solutions containing moderate to high solids.
SpinTek’s Membrane Products Group
specializes in solutions for waste and process
streams formerly considered untreatable.
C
M
Y
CM
MY
The membranes can be easily removed from the
system for inspection after testing or operation. The
ST-II-25 membrane surface can be fully inspected
unlike most other membrane systems.
Membranes
The ST-II-25 can use a wide variety of stainless steel
membranes. Stainless steel membranes are available
in pore sizes from 0.1 to 10 microns. SpinTek can
install custom or prototype membranes on SpinTek
ST-II-25 disks.
Controls and Instrumentation
The SpinTek ST-II-25 is fully instrumented and
automated for production use or pilot testing. The
ST-II-25 controller is simple to operate with a
NEMA 4 rated panel, lights and switches. Explosion
proof ratings are also available.
The standard control system includes full PLC
Membrane
CY
CMY
KEY BENEFITS
K
• Rotary and high shear action
MEMBRANE
COVERED
SPINNING
DISKS
• Concentrate up to 60% solids
• Suitable for hazardous waste
streams
• Handles high level radioactive
waste (HLRW) and low level
radioactive waste (LLRW)
PSL PCV
2
3
• Variety of pore sizes available
• Durable stainless steel
membranes for long life
HV-4
FE
1
• Explosion proof (optional)
• 316 stainless steel construction
• Stainless steel membranes are
available in pore sizes from
0.1 to 10 microns.
PI
1
CV
1