STA-61 and STA-61G Sync Tester/Analyzer0 pages
9483_NetClock_revE.indd table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:4.00pt "Arial", sans-serif; } .font1 { font:4.60pt "Arial", sans-serif; } .font2 { font:6.00pt "Arial", sans-serif; } .font3 { font:8.00pt "Arial", sans-serif; } .font4 { font:12.00pt "Arial", sans-serif; } .font5 { font:14.00pt "Arial", sans-serif; } .font6 { font:15.00pt "Arial", sans-serif; } .font7 { font:16.00pt "Arial", sans-serif; } .font8 { font:21.00pt "Arial", sans-serif; } SPECTRACOM test&measurement STA-61 and STA-61G Sync Tester/Analyzer penduIum Օ . . . o Օ Synchronization test platform for Next Gnration Networks (NGN) 驕 Modular multi-input measurements: 2, 4 or 6 channels simultaneously Measures E1/T1, SyncE and PTP clocks Օ Comparison with standard masks Very accurate built-in Rubidium reference with GPS control Օ Portable and cost-effective User-friendly Shown with stand The Pendulum STA-61 marks a new gթnration of instruments allow-ing the user to test and analyze sync in various types of networks. Where traditional instruments on the market are designed specifically for SDH/SONET or are dedicated SyncE or PTP testers, the STA-61 can do it all. This is a Sync Tester/Analyzer developed for Next Generation Networks (NGN), incorporating a mix of both traditional SDH/SONET core networks and IP-based backhaul networks. Portable and Cost-Effective Lightweight, with a handle and a size that fits as carry-on lug-gage on aircrafts, the STA-61 is designed to make it easy to bring wherever you want to use it. Place the sync tester/analyzer on a work-bench or use the stand for comfortable viewing when the instrument is placed on the ground. All these functions are packed together in an instrument that is still much less than the price of tra-ditional testers on the market, makes STA-61 the most cost effective solution for field synchronization test. Truly User-Friendly Equipped with a large color LCD touch screen, showing TIE, TDEV, MTIE, RTIE, MRTIE, ADEV or FDEV results in real-time during mea-surement, and combined with intuitive menus, this sync tester/ana-lyzer is a truly user-friendly unit. All it takes to start measuring is a simple 3 step operation: 1) Connect your signal(s) to test 2) Press SIGNAL CHECK to identify signal type 3) Press START Within a few minutes anyone could learn how to operate the STA-61. No time or cost needs to be spent on training and the risk for op-erator mistakes is eliminated. Modular and Future Proof Sequential testing is no longer necessary if you want to measure wander on several access points in a station, the STA-61 can mea-sure on up to 6 different test points simultaneously. Thanks to the modular input design in a generic measurement platform, it is easy to expand the STA-61 with more measurement input modules in the future. The E1/T1/1PPS Input Module measures all standard telecom clocks, the 125 MHz or 156.25 MHz, 1GigE or 10GigE, SyncE reference clock as well as the typical 1-pps physical output from a termination PTP slave. Or, set-up user-defined clocks from 0.5 Hz to 160 MHz. The modular design makes STA-61 future proof, buy your new sync tester/analyzer today and expand it with more input modules when you need it. Two Models Choose between two models: The basic STA-61 model has slots for up to three input modules with two inputs each, and a wide range of input/ outputs, incl. 1, 5 or 10 MHz reference in/out plus 1-pps out. The STA-61G model also includes an integrated GPS-receiver and external 1-pps input. Both models offer an optional E1/T1 clock/data output. Always Accurate The STA-61 includes a built-in high performance Rubidium oscillator which allows making sync measurements in places where no accu-rate frequency/time reference is available. This is key to field com-missioning or trouble-shooting operations. In addition, the STA-61G has a built-in high sensitivity GPS receiver which slaves the internal reference to provide a few tens of nanoseconds absolute UTC time ac-curacy as well as 10-12 frequency accuracy. No external calibration, and no calibration down-time, is needed with the STA61G. USA | 1565 Jefferson Road, Suite 460 | Rochester, NY 14623 | +1.585.321.5800 | sales@spectracomcorp.com FRANCE | 3 Avenue du Canada | 91974 Les Ulis, Cedex | +33 (0)1 64 53 39 80 | sales@spectracom.fr UK | 6A Beechwood | Chineham Park | Basingstoke, Hants, RG24 8WA | +44 (0)1256 303630 | info@spectracom.co.uk ■q '魕fO-90»X
"