TE1100 pages

Thermostats

NEW

DATA SHEET

TE110 On / Off LCD Electronic Thermostat 24Vac

added
features

Description
Two position On/Off electronic room thermostat with digital display and digital key set point. Suitable for controlling
heating or cooling valves, fans or other two position devices to maintain an accurate room temperature. Selectable
Celsius or Fahrenheit scale by jumper J1. External heating/cooling changeover thermostat or wire jumper can be
connected to terminals 4 and 5 to select heating or cooling mode. Economy mode can be implemented by grounding
terminal 6 or connecting a contact across terminal 6 and 7. The hand icon will be displayed. Pressing the hand button
for 3 seconds will override to a regular mode for a 2 hour period. Optional external 10K NTC type 3 temperature
sensor can be connected to terminal 8 and 9 and selected by jumper J2. Full or limited set point adjustment can be
set with jumper J3. If using the thermostats for DX cooling an extended delay can be selected with jumper J4.

Specifications
Operating voltage:
Power consumption:
Control output:
Switching:
Sensing Element:
Connection terminals:
Digital Display:

24Vac, 50/60Hz, +/- 20%
Maximum 3Va
24Vac, 5Amp
1 ºF (0.5 ºC)
NTC Thermistor
Use solid wire 22 AWG to 14 AWG
Temperature in ˚C or ˚F, set point,
heating or cooling output
Set point range:
50-90ºF in 1ºF resolution
10-32ºC in 0.5ºC resolution
Operating temperature: 32-122 ºF or 0-50 ºC, < 95% RH
Housing cover/base color: Cover white, base grey
Wall mounting plate:
Color white, mounting holes for European and
North American standards, fits 2 x 4 electric box
Optional:
External 10K NTC type 3 thermistor
Shipping weight:
0.5Lbs (0.225 Kg)
Agency approval:
Conforms to CE/ROHS requirements
Class 2 as per UL/CSA

Quality, affordable electronic
room thermostat with digital
display from Spartan

Jumper selections
Pole
1
2
3
4

ON
˚F Scale
External sensor
Normal temperature range
Long delay - 4 minutes

OFF
˚C Scale
Internal sensor
Limited temperature range
No delay

IMPORTANT: After a setting change, the thermosat must be powered off
for the changes to take effect.
Changing the Set Point

7

4

To change set point use the
increase or decrease keys.
LCD display will illuminate after
pressing hand key.

Ground

6

Ground

Changeover
Thermostat
Optional

5

Wiring Diagram
Occupancy
Contact

Add jumper for cooling mode

24V
Common

9
2 R

ON DEMAND
Terminal 4 - 5
A = Heat Mode
B = Cooling Mode

?

NO
Actuator
Cooling or
Heating
Application

C 1

24V Line

When the thermostat is in heating
mode a thermometer will appear in
the display. It will flash when there
is a demand for heat.

NC
Actuator
Cooling or
Heating
Application

8

External
Sensor

?

On Power Failure
The set-point will remain in
the memory.

Output
Terminal 1 Terminal 2
0 Vac
24 Vac
0 Vac
24 Vac

TE110 Cover Removal

3.520”
[89mm]

To remove the cover simply remove the screws at the bottom
of the unit with a screwdriver (1 and 2). The cover then is
removed by pulling it out and then up (3 and 4).

Mounting
Dimensions
1.376”
[35mm]
4.178”
[106mm]
1.200”
[30mm]

1.010”
[26mm]

1.188”
[30mm]

When the thermostat is in cooling
mode a snow flake will appear in
the display. It will flash when there
is a demand for cooling.

Disclaimer:
The installation and service
should be performed by
trained personnel. To avoid
electric shock ensure the
electrical source is
switched off.
Installation:
Thermostats can be installed
on a standard
20-20 2X4 electric box, or
directly on the flat wall
surface, and away from
the heat source.
Do not expose to water.

Spartan Peripheral Devices telephone: (450) 424-6067 • fax: (450) 424-6071 • email: info@spartan-pd.com • website: www.spartan-pd.com

TE110NThermostat
3 May 2012