Triple Disc Polymeric Insulator0 pages
25kV AC Railway Insulators
nnTriple Disc Polymeric Insulator nnThis vandal resistant insulator is designedspecifically to directly replace three
ceramic cap and pin insulators to drawing121/003/002 and 121/833/001 for useonly in horizontal, in-line configurations.
With the same 70kN minimum electro-mechanical failing load, theprimary railway application for thisinsulator is for dead-end mast applications
for use with counterweights. Other
applications are for mid-point anchorsand wire overlaps.It has a very low profile and this feature isimportant when ensuring signals are keptfree from sight encumbrance. Moulded onto high strength GRP rods,these insulators utilise Henleys uniqueEPDM dielectric cladding. This highly
successful cladding has been proven
around the world from deserts to arctic
environments for more than 30 years.Thematerial has outstanding pollutionand weathering performance which,
coupled with its non-flammability, also
makes it ideal for tunnels and stations
where natural rain-washing is notpossible.These insulators have 16mm spungalvanised (to BS EN ISO 1461), cast SGiron ball and socket end-fittings (to
BS3288 and IEC publication 120). They
are supplied with phosphor bronzesecurity clips to IEC publication 372.This insulator is also available with tongueand clevis end fittings to IEC 471.The weight of this unit, which is approx.1.8 kgs contrasts with the porcelainequivalent at 13.5kgs, which, makeshandling and installation much easier. ҕ >
Network Rail ApprovalNumber: PA05/656T >
Network Rail StandardRT/E/S/21082ՕDirect replacement for3off cap and pin
insulators.Unique Henley EPDMCladding material.ՕVandal resistant and lowprofile.Very light weight (1.8kgs)
ՕCan be supplied with balland socket or tongue and
clevis end fittings. >
A subsidiary of TT electronics plc