69 - Arrowhead Pawl Indicator Design Cam Latches0 pages

نسخه متنی

So	it	ico® Pawl/Cam Action Latches
Arrowhead (Pawl Indicator) Design • Detents in full open and closed positions • Turn clockwise or counter-clockwise to operate					JffP

tch

l _i

cti<

Height of knob (from outside surface of panel) is adjustable within limits shown by adjusting ferrule on threaded sleeve before installing latch. MAX. OUTER PANEL THICKNESS and GRIP RANGE are governed by specific knob height selected - (see table).

GRIP RANGE

Material and Finish

KNOB: Nylon, black. SHAFT: Low carbon steel, zinc plate, chromate plus sealer. PAWL: 1010 Steel, zinc plate, chromate plus sealer. FERRULE: 6061 Aluminum, natural. SLEEVE: Die-cast zinc with chemical protective film. MOUNTING NUT: (300 SERIES) 303 Stainless steel, passivated. MOUNTING NUT: (Other series) Steel, zinc plated plus chromate dip. JAM NUTS: Steel, zinc plate, chromate plus sealer. SPRING: 302 Stainless steel, natural. PIN: 303 Stainless steel, natural. WASHER: Stainless steel, passivated. LOCKWASHERS: (300 Series) Stainless steel, passivated. LOCKWASHERS: (Other Series) Spring steel, zinc immersion coating.

FERRULE-

SLEEVE

JAM NUT

■KNOB

-Mrf

MOUNTING NUT

KNOB HEIGHT-

MAX. OUTER PANEL THICKNESS

DIMENSIONS			KNOB HEIGHT	Max. Outer Panel Thickness	GRIP RANGE				Series	INSTALLATION				shaft thread size
										H ±0.13 (±0.05)	w +0.13 -0.00 (+.005 -0.00)	X
0D	L	P			Pawl as shown		Pawl reversed
					MIN.	MAX.	MIN.	MAX.				MIN.	MAX.
12.7 (0.50)	38.1 (1.50)	13.5 (0.53)	12.7 (.50) MAX.	1.59 (.063)	4 (.16)	13.4 (.53)	15 (.59)	24.6 (.97)	69-10-301-11 •	300	8.33 (.328)	6.99 (.275)	9.53 (.375)	11.11 (.438)	6-32 UNC
			9.5( .38) MIN.	4.75 (.188)	7.1 (.28)	18.3 (.72)	18.3 (.72)	28.2(1.11)
19.1 (0.75)	47.5 (1.87)	15.9 (.63)	17.5 (.69) MAX.	1.59 (.063)	3.2 (.13)	15.9 (.63)	15.9 (.63)	28.6(1.13)	69-10-401-11 •	400	11.51 (.453)	9.78 (.385)	12.30 (.484)	13.10 (.516)	10-32 UNF
			12.7 (.50) MIN.	6.35 (.250)	7.9 (.31)	20.6 (.81)	20.6 (.81)	33.3(1.31)
28.6 (1.13)	79.2 (3.12)	34.1 (1.34)	25.4 (1.00) MAX.	6.35 (.250)	4.8 (.19)	30.2(1.19)	30.2(1.19)	55.6(2.19)	69-10-501-11 •	500	16.26 (.640)	13.72 (.540)	22.23 (.875)	25.40 (1.000)	5/16-24 UNF
			19.1 (.75) MIN.	12.70 (.500)	11.1 (.44)	36.5 (1.44)	36.5 (1.44)	61.9(2.44)

Installation

Latch operates through 90° rotation in direction shown with a positive click stop at both extremes. Pawl pulls up at both extremes.

1. Adjust ferrule to desired knob height (see table).

2. Remove shaft nuts, lockwashers, pawl and mount䭭ing nut (if assembled).

3. Insert shaft through hole in panel to engage flats of sleeve with shaped hole.

4. Check arrow orientation.

5. Apply and tighten mounting nut.

6. Install pawl and shaft nuts as shown, position pawl for desired grip and use two wrenches to tighten nuts firmly against pawl.

millimeter (inch)

Dimensions without tolerances are for reference only.

souLhco

102

' Products identified with this symbol are stocked subject to prior sale in one or more of our global locations. If unavailable from our facility nearest you, allow for shipping time from another facility.

درباره سازنده

اطلاعات تماس

69 - Arrowhead Pawl Indicator Design Cam Latches0 pages

تمام کاتالوگها و بروشورهای فنی شرکت SOUTHCO

IRAN INDUSTRY EXPO

خدمات بازرگانی