PRDAT/PRDAWT Series0 pages
PRDAT/PRDAWT Series
Long distance inductive proximity sensor (spatter resistance type)
Features
● Long sensing distance (1.5 to 2 times longer sensing
distance guaranteed compared to existing models)
● Coated with the material against thermal
resistance(prevention of malfunction due to spatter)
● Improved the noise resistance with dedicated IC
● Built-in surge protection, reverse polarity protection,
overcurrent protection circuit
● red LED operation indication
● Protection structure IP67(IEC standards)
● Available as spatter-resistance limit switch
Please read “Caution for your safety” in operation
manual before using.
The characteristic of spatter-resistance type
The hot arc from arc welding machine is adhesive even with metals or plastics.
Therefore, normal proximity sensor might have malfunction even though there are no sensing object if the
arcs are put on the sensing surface. The arcs are not adhered on the sensing part of the spatter-resistance
type proximity sensor as the part is coated with teflon against thermal resistance. Also, the protection cover
sold optionally has the same function.
Specifications
●DC 2-wire type
PRDAWT18-7DO
PRDAWT18-7DC
PRDAWT18-7DO-I
PRDAWT18-7DC-I
PRDAWT18-7DO-IV
PRDAWT18-7DC-IV
PRDAT30-15DO
PRDAT30-15DC
PRDAT30-15DO-V
PRDAT30-15DC-V
PRDAWT30-15DO
PRDAWT30-15DC
PRDAWT30-15DO-I
PRDAWT30-15DC-I
PRDAWT30-15DO-IV
PRDAWT30-15DC-IV
Model
PRDAT18-7DO
PRDAT18-7DC
PRDAT18-7DO-V
PRDAT18-7DC-V
Sensing distance
Hysteresis
Standard sensing target
Sensing distance
7mm
Max. 10% of sensing distance
20×20×1mm(iron)
0 to 4.9mm
Power supply
(operating voltage)
12-24VDC
(10-30VDC)
Leakage current
Response frequency※1
Residual voltage
Affection by Temp.
Control output
Insulation resistance
Dielectric strength
Vibration
Shock
Max. 0.6mA
250Hz
100Hz
Max. 3.5V
Max. ±10% for sensing distance at ambient temperature 20℃
2 to 100mA
Min. 50MΩ (at 500VDC megger)
1,500VAC 50/60Hz for 1 min.
1mm amplitude at frequency of 10 to 55Hz (for 1 min.) in each of X, Y, Z directions for 2 hours
500m/s2(approx. 50G) in each of X, Y, Z directions for 3 times
15mm
45×45×1mm(iron)
0 to 10.5mm
Indicator
Operation indicator (red LED)
Ambient
-25 to 70℃, storage: -30 to 80℃
Environ- temperature
ment
Ambient humidity 35 to 95%RH, storage: 35 to 95%RH
Protection circuit
Protection
Material
Cable
Surge protection circuit, overcurrent protection
IP67(IEC standard)
Case/Nut: Teflon coated brass, Washer: Teflon coated Iron, Sensing surface: Teflon,
Standard cable(black): Polyvinyl chloride(PVC), Oil resistant cable(gray): Polyvinyl chloride(oil resistant PVC)
ø5, 2-wire, 2m
ø5, 2-wire, 2m
(AWG22, Core diameter :
ø5, 2-wire, 300mm,
(AWG22, Core diameter :
ø5, 2-wire, 300mm,
0.08mm, Number of cores: 60, M12 connector
0.08mm, Number of cores: 60, M12 connector
Insulator out diameter:ø1.25)
Insulator out diameter:ø1.25)
Approval
Weight※2
Approx. 134g(approx. 122g) Approx. 77g(approx. 65g)
Approx. 221g(approx. 184g) Approx. 155g(approx. 143g)
※1: The response frequency is the average value. The standard sensing target is used and the width is set as 2 times of the standard sensing target,
1/2 of the sensing distance for the distance.
※2: The weight with packaging and the weight in parentheses is only unit weight. ※ Environment resistance is rated at no freezing or condensation.
D-22
"