9.95 Gbps to 11.3 Gbps 16-bit Transceiver0 pages

P

B

9.95 Gbps to 11.3 Gbps 16-bit Transceiver
FEATURES: SPECIFICATIONS:

Continuous Frequency of Operation: 9.95 Gbps to 11.3 Gbps Exceeds SONET Band Jitter Generation Performance (35 mUI) Better than 2X Margin to the OC-192 Jitter Tolerance SONET Mask Excellent Crosstalk Immunity and Asynchronous Tx and Rx Operation >

VSC8479

10mV Input Data Sensitivity (differential) OIF 99.102.8 LVDS Compatible Parallel Data Inputs and Outputs 16:1 Mux/Demux Transceiver With Integrated Clock Multiplier Unit, and Clock and Data Recov-ery Unit with
Limiting Amplifier 1.8V Single Power Supply with Optional 3.3V LVTTL I/O 0.13μm CMOS Process Technology Full Support for 300-Pin MSA Transponder Modules: - Multiple Reference Clock Source Inputs and Selectable Frequencies - Facility and Equipment Loopback Modes
- Support for Line Timing Mode with Clock Clean-up - Loss of Lock (LOL) and FIFO Alarm Outputs - Adjustable Loss of Signal (LOS) Alarm 1.15 Watt Typical Power XFI Output Compliance Mode for XFP Modules Built-in Self-test Generation and Error Detection: - Industry Standard PRBS Generation and Detection
- User Defined Patterns -5C Ambient to 90ںC Case Temperature Programmable Input Signal Bandwidth Equalization (EQ) - Enhanced Optical Performance
- Enhanced XFI Stressed Eye Performance 17mm x 17mm, 244-Ball, CBGA Package 12 x 12, 195 pin FCBGA Package Two-wire or SPI Micro-controller Serial Interface Port (selectable) - Programmable Registers for Access to All Control/ Status Signals >

APPLICATIONS:

SFP+ SR/LR Module to Host SERDES Applications TxRef Clock, RxRef Clock and ExRef Clock Sources - Flexible Reference Clock Routing - Reference Clock Clean-upӔ Phase Detector XFP Module XFI to Host SERDES Applications 300 Pin MSA Transponder Modules 10GE and Fibre Channel to SFI-4 SERDES Applications Selectable Duobinary Modulation Pre-Coder Programmable High-speed Input Voltage Offset Adjust SONET/SDH and DWDM Systems High-speed Data Inversion and Low-Speed Bit Order Swap High-speed CML Clock Output with Power Down Mode >

BENEFITS:

Proven XFP/SFP+ Module Inter-operability Low Power, Full Featured CMOS Transceiver Single Chip Mux/Demux Solution: Provides Complete Set of 300 Pin MSA Transponder Functions Including all Loopback and Clocking Modes Robust Asynchronous Operation and High Immunity to Crosstalk Multiple Reference Clock Source and Clean up Schemes www.vitesse.com >