تماس با ما
وب سایت در حال به روز رسانی است. از شکیبایی شما سپاسگزار هستیم.

منابع یابی و خرید تجهیزات صنعتی

محصولات
محصولات
سازندگان
کاتالوگ
فیلم

 (ویژه صنایع و کارخانجات )

خدمات خرید ، حمل ، ثبت  سفارش ، ترخیص و تحویل هر گونه کالای صنعتی از اروپا ، چین ، ترکیه  و امارات متحده عربی
لطفا جهت خرید ، حمل ، ترخیص و تحویل هر گونه کالای صنعتی در هر نقطه از دنیا با ما در تماس باشید .
ایمیل sales@meshgad.com

تماس : ۸۸۸۷۱۸۰۸ - ۸۸۸۷۱۸۷۵ - ۸۸۶۵۶۴۷۱

  • 1
  • 2
  • 3
  • 4
  • 6
LOADING

Floating decanters0 pages

نسخه متنی
"

Structural Features
1

Float
The float sustains a submersible pump
by buoyancy at an appropriate position.
Made of fiber reinforced plastic (FRP),
the float is filled with polystyrene foam
which prevents the loss of buoyancy in
case the float is broken.

2

Guide Support
Anti-sludge Sensor Cable

Float 1

4 Amplifier Unit Box

Intake Check Ball
A check ball incorporated in the intake
closes the suction mouth by buoyancy
when the pump stops operating thus
preventing the inflow of floating sludge.
During operation, the ball is sucked in by
the pump’s suction power to take in
supernatant liquid.

Suction Mouth

Sensor Cleaning Hose

Intake Check Ball 2

5 Anti-sludge Sensor

Discharge Hose

At rest
Submersible Pump 3

6 Sensor Cleaner
Guide Pipe Fixing Plate

Guide Pipe
Stopper

Colored components are sold separately.

In operation

Sucking

5

Anti-sludge Sensor
When the amount of light transmitted
from an emitter via glass fibers is
reduced by a certain density of sludge
existing in the liquid, the sensor identifies the light amount and sends corresponding signals to the control panel to
stop or operate the pump not to suck up
sludge.

6

Sensor Cleaner
The sensor cleaner spouts a jet of clean
water from its nozzle to wash the light
emitter and receiver at fixed intervals.
The pressurized water can be treated
water coming from a submersible pump
installed in the spray pump tank.

Recommendation;
• The washing shall be performed for 5
minutes every 1.5 hours during the
aeration process.
• The amount of washing water shall be
regulated with a valve over a range of
10 to 20 L/min and the pressure, 0.5 to
1 kg/cm2.

3

Pumping Section
Each component, such as dual inside
mechanical seal, motor protector, and
anti-wicking cable entry, represents
Tsurumi’s outstanding expertise.

4

Amplifier Unit Box

We reserve the right to change the specifications and designs for improvement without prior notice.

Your Dealer

Printed on a recycled paper with soy ink -Evidence of our commitment to the environment
Printed in Japan CAT. IA107-D RI-D-G-O

Amenities from Technology
for People and the Earth

"

IRAN INDUSTRY EXPO

The largest online Industrial exhibition in Iran

 عضویت ورود   ENGLISH


اگر مجموعه شما جزو صنایع مادر و معظم در فیلد پالایشگاه ، پتروشیمی ، حفاری ، نیروگاه ، معادن و فلزات ، خودروسازی ، تولید مواد غذایی و.... می باشد لطفا درخواست خود را بر روی سربرگ به فاکس 88206264 و یا ایمیل enquiry@iranindustryexpo.com بنام شرکت مهندسی و بازرگانی مشگاد ارسال فرمایید.
اگر مجموعه شما جزو بنگاه های متوسط و کوچک در فیلد تولید ، بازرگانی ، مشاوره ، پیمانکاری ، دانشگاه ، پژوهشگاه ، توزیع ، فروشگاهی وکارگاهی می باشد ، پس از عضویت و با پرداخت هزینه ( به ازای هر درخواست معادل 50 یورو ) از خدمات زیر برخوردار خواهید شد :
  • پاسخ به پرسش های فنی و دریافت مشاوره از سازنده ، دریافت کاتالوگ و اطلاعات تکمیلی
  • دريافت پرفورما از شرکت سازنده
  • اطلاع از زمان تحويل و قيمت خالص كالا
  • اطلاع از هزينه هاي حمل و ترخيص و کارمزد تا تحويل كالا به انبار شما در هر نقطه از كشور
  • دریافت پیش فاکتوررسمی ( ارزی و یا ریالی ) به روش کارمزدی
*صدور پیش فاکتور رسمی فقط به نام شرکتهای ثبت شده که دارای کد بازرگانی معتبر باشند انجام پذیر است. در صورتیکه در حین مکاتبه با شرکت سازنده مشخص شود که دارای نماینده انحصاری و یا شعبه در ایران بوده و یا به به هر دلیل شرکت سازنده از فروش کالا به بازار ایران استنکاف نماید ارایه این سرویس متوقف و وجه دریافتی به حساب کاربر عودت می شود

ادامه