SOLO-Furnaces-PAS_Bell-type_controlled_atmosphere_heat_treatment_furnace_line_for_aircraft_industry0 pages
REF. PAS—-
nnnn^itzerlarT^
nnnnwww.soloswiss.com
nnnnType: Profitherm 800
nnnnTreatment: Annealing - Carburizing
nnnnSector: Aircraft
nnnnCountry: China PRC
nnnnSAMPLES OF TREATED PARTS
nnnnBell-type controlled atmosphere heat treatment furnace line
nnnnfor aircraft industry
nnnnTechnical data
nnnn- Composition: austenitizing furnace - oil tank - salt tank - slow cooling tank - washing machines - tempering furnaces
nnnn- The furnace line is applied for heating under protective atmosphere, normalizing, annealing, carburizing and
nnnncarbon restoration, special for sheet carburizing and long shaft part heat treatment
nnnn- Max. working temperature of the austenitizing furnace: 1000°C
nnnn- Max. working temperature of the oil tank: 150°C
nnnn- Max. working temperature of the salt tank: 450°C
nnnn- Max. working temperature of the tempering furnaces: 750°C
nnnn- Effective load dimensions: diameter 900 mm x height 1500 mm
nnnn- Max. weight of the load (gross): 650 kg
nnnnAdvantages
nnnn- The modular furnace line can perform multiplicate heat treatment cycle
nnnn- The heating elements are evenly distributed around the bell, independent heating zone and heating zone
nnnnassociated control, fan and gas circulation system are axial distributed, allow gas uniformity and high speed
nnnncirculation
nnnn- The heating elements are evenly distributed around the bell, independent heating zone and heating zone
nnnnassociated control, fan and gas circulation system are axial distributed, allow gas uniformity and high speed
nnnncirculation
nnnn- The heating furnace can quench in the slow cooling tank, salt tank and oil tank
nnnn- The independent structure of modules allows the furnace and the quenching tank can have maintenance
nnnnindependently any time
nnnn- Aerospace AMS2750D specifications
nnnnOptions & accessories
nnnn- 5m3 liquid N2 storage container
nnnn- Vaporizing device
nnnn- Gas container
nnnn- Methanol container, pipeline, valve and flowmeter
nnnn- Powered by Axron Swiss process control
nnnnSOLO Swiss Group
nnnnSOLO Swiss
nnnnIndustrial Furnaces
nnnnTel. +41 32 465 96 00
nnnnmail@soloswiss.com
nnnnwww.soloswiss.com
nnnnBorel
nnnnBorel Swiss
nnnnFurnaces & Ovens
nnnnTel. +41 32 756 64 00
nnnnmail@borel.eu
nnnnwww.borel.eu
nnnnA
nnnnXROIM
nnnnSWISS TECHNOLOGY
nnnnAXRON
nnnnProcess Engineering
nnnnTel. +41 32 465 10 20
nnnnmail@axron.com
nnnnwww.axron.com
nnnnO
nnnnThermic Service
nnnnTHERMIC SERVICE
nnnnRepair & Maintenance
nnnnTel. +41 32 465 96 00
nnnnmail@thermic-service.com
nnnnwww. thermic-service.com
"