عضویت 
ورود اعضا
راهنمای خرید
Orbit® LTM Digital Laser0 pages
AMETEK
ULTRA PRECISION TECHNOLOGIES
A precision non-contact laser for Gauging
Description
Solartron Metrology, the world leader in linear measurement innovation, has
now added another performance sensor to it's line-up. Orbit LTM is a Laser
Triangulation unit for precision measurements, with 0.04% F.S. reading over
2 or 10 mm measurement ranges.
Its advantages include:
• Auto Gain Circuitry: The unit automatically adjusts the power to the laser
based on feedback from the material, providing better readings on more
difficult surfaces
• Gap Time: If you are checking a surface with gaps or holes that could
throw off data, the laser has a bridging function where you can program the
laser to account for those dropoffs. Your data is then less likely to be
skewed.
• Diffuse or Specular modes: Instead of purchasing a separate unit for
Diffuse or Specular applications, the laser can switch between the two
different modes, depending on the material. For Specular Mode, the laser
must be tilted to 22.5 degrees from the perpendicular axis (2 mm) or 15.8
degrees (10 mm).
Features
2 mm and 10 mm ranges
Up to +/- 0.03% F.S. Accuracy
Up to 0.24 urn resolution
40 kHz sampling speed and up to 4 kHz output
Laser Beam Control - the beam can be switched off allowing multiple
lasers to measure points very close together where beam interference
could occur. In the bean off mode the laser head remains powered so that
readings can quickly be taken after turning the beam on.
Plugs into Orbit®3, network up to 150 sensors with full control. The laser
functions via the Orbit®3, interface using Ethernet, Modbus, USB or RS232.
The LTM can also be used with the Orbit®ACS products (with integra
display) where control is via the menu or via Orbit® ACS Modbus interface
Precision Driven
Product Applications
Precision. Quality. Reliability
www.solartronmetrology.com • sales.solartronmetrology@ametek.com
"
