VicVibro SWM2.010 pages

VicVibro SWM2.01

Anti-vibration wall mountings designed to prevent structural transmission and provide maximum structural stability. Highly
recommended for absorption of vibrations produced by airborne and impact noise. The lowest frequencies of airborne noise tend to
be in the range of 28-30Hz. Impact noise tends to be even lower.
The steel spring system and EPDM rubber is specially designed to prevent sound amplifications through the wall structures, where
the sound pressure level is between 100dB-105dB (medium/ low frequencies). These units are a must in walls with sizable dimension.
Advantages Extremely efficient on the low frequency range. The system combines specially designed materials and techniques to
achieve better results, and allowing vibration reduction in both directions. It has a security system to prevent the complete collapse of
the treatment in case of fire. Extremely efficient in industrial zones. CharacteristicsSuited for steel studs with dimensions: 48mm,
70mm, 90mm. May adapt to other dimensions. Installation The first unit should be applied 1,50m from the floor. The second unit
should be applied 3,00m from the floor. So on and so forth. The last unit should be applied between 10-30cm from the acoustic
ceiling. Remember that the installation of the wall mountings should be in a criss-cross sequence (please see the installation
procedure sheets).

Main Info

Ref: B00488
EAN13: 5600301842009
HS-Code: 68069000

Performance

Mounting Width: 48, 70 and 90mm
Load Weight Range: 10.00 to 70.00 Kg

Installation

Place: Division Wall
Steel: Yes
Fire Security Devices: Yes
Plate Thickness: 1.5 mm
Plate Length: 265.0 mm

Shipping

Units Per Box: 50 boxes
Box Dimensions: 0.0 x 0.0 x 0.0 mm
Box Weight: 0.0 kg