SE 320 numeric0 pages

Operation and control
Attendance and control
TECHNICAL PARAMETRES
Support of the work piece
Workpiece fixing
The operator is allowed to move the the
moves the tailstock on tailstock
on the bed slideways manually with
bed guideways manually.
a possibility to drag it using the saddle.
Tailstock is fixed by the lever with an
The lever additionally also additionally
eccentric, with an eccentric,with a screw.also
Tailstock sleeve isenables the operator
with a screw, also pushed out by the hand
wheel. tailstock in a manual mode.
to fix the
The hand wheel enables the operator to push
out the tailstock barrel.
Control system
Control system
There are four control system variants available to
control systems available to
perspicuous
meet the customer’s demand by the reputable
as Heidenhain, Siemens, Fanuc
producers SIEMENS, FANUC and HEIDENHAIN,
and Fagor, who offer optimal user comfort
that offer optimal user comfort in machining the
shape-complicated workpieces. Software extenin machining the shape-complicated work pieces.
sions ManualTurn and TurnMate serve for
Software extensions ManualTurn and ManualPlus
programming support. support.
serve for programming
Operating range
Operating range
Distance between centres
Distance between centres
Swing over bed bed
Swing over
Swing over cross slide slide
Swing over cross
Chuck diameter
Chuck diameter
750 mm
750 mm
320 mm
320 mm
170 mm
170 mm
160/200 mm
160/200 mm
Spindle
Spindle
Spindle bore
Spindle bore
Spindle nose
Spindle nose
42 mm
42, 57 mm
ISO B5, B6
for bore ø 42
ISO 702/III702/III B5
Internal taper metric
for bore ø 57
ISO 702/III D6 50
Spindle speed range – 1st speed step
1 metric min-1
– 880 50
Internal taper
for ø 42
Spindle speed range – 2ndøspeed step
1 – 3500 min-1
for 57
Mk 6
Spindle speed range – 1st speed step
1 – 880 min-1
Spindle drive
Spindle speed range – 2nd speed step
1 – 3500 min-1
Torque MKmax
210 Nm
S1 main motor output
7 kW
Spindle drive
S6 main
Torque MK motor output (when overloaded) max 21010 kW
Nm
S1Number of output steps
main motor speed
7 kW 2
S6 main motor output (when overloaded)
The of speed and
Numbercarriages stepsthe drive
Cross slide feed range
Tool-holding fixture
Tool post
Tailstock
Tool-holding fixture
Tailstock sleeve diameter
Internal taper of tailstock sleeve
Tailstock
Tailstock sleeve stroke
Tailstock sleeve diameter
Internal taper of tailstock sleeve
Control system
Tailstock sleeve stroke
HEIDENHAIN ManualPlus 4110
SIEMENS 810 D ManualTurn
Control system
FANUC - being prepared
HEIDENHAIN MANUAL plus 4110
SIEMENS 810D ManualTurn
Machine tool size
SIEMENS 840D solution line Manual Machine
Length including the chip conveyor
FANUC 0i-TC Manual Guide i conveyor
Length without the chip
FANUC 0i-TC Turn Mate i
Width x Height
Machine size
Weight (without special accessories)
Length including the conveyor
Length with the chip pan
Width x Height
ON
M ENTAL
E N VI
R
E N VI
R
Weight (without special accessories)
O
N
NM E TAL
183 mm
790 mm
MULTIFIX B
MultiSuisse B
60 mm
Morse 4
120 mm
60 mm
Morse4
120 mm
• 1 x operating manual set
Extra executions:
Extra versions:
• Spindle bore, Ø 57 mm
• Spindle bore, Ø 57 mm
• Spindle nose BAYONET B6 for Ø 57 mm
• Spindle nose BAYONET B6 for Ø 57 mm
CAMLOCK D6 for Ø 57 mm
• Eight-position turret SAUTER non-driven tools
• Eight-position turret SAUTER withwith non-driven tools
• Pneumatic chucking
• Chip conveyor
• Chip conveyor
• Executions for different voltages:
• 3 x 220V/60 Hz, 3 x 440V/60Hz, 3 x 575V/60 Hz Hz,
Versions for different voltages: 3 x 220V/60
3 x 440V/60Hz, 3 x 575V/60 Hz
Special accessories:
Special accessories:
• Follow rest, Ø 10 – 115 mm
• Follow rest, Ø 10 115 mm
• Steady rest, Ø 10 ––115 mm
• Steady rest, Ø 10 – 115 Ø 200
• 3-jaws mechanical chuck, mm mm
• 3-jaws mechanical chuck, Ø 200 mm
• 4-jaws mechanical chuck, Ø 160 mm
• 4-jaws mechanical chuck, Ø 160 mm
• 4-jaws mechanical chuck, Ø 200 mm
• 4-jaws mechanical chuck, Ø
• Spare chuck jaws and flanges 200 mm
• Spare reducing sleeve
• Spindlechuck jaws and flanges
• Spindle reducing
• Fixed centre MK4 sleeve
• Fixed centre MK4
• Live centre MK4
• Live centre MK4
• Tool holder MultiSuisse, CAPTO, PARAT, SAUTER
• Tool holder MULTIFIX, CAPTO, PARAT, SAUTER
• Anchoring material, transport device
• Anchoring material, transport device
320 NUMERIC electronic
SE 320 NUMERIC CNC lathe lathe
SE 320 NUMERIC universal electronic lathe
320 NUMERIC universal CNC lathe
with simple control and minimal spatial
with simple control and minimal spatial
requirements, achieving high performance
high
turning operations.
at all turning operations.
SE 320 NUMERIC
3300 mm
2415 mm
1490 x 1735 mm
cca 1600 kg
3300 mm
2415 mm
1490 x 1735 mm
cca 1600 kg
Environmental drives
The use of the most modern drives with energy recuperation allows for use of kinetic energy of machine rotating parts upon braking and its recuperation into electric energy which is returned back into
the network. Lower consumption of electric energy in machine operation is an effect for the user.
L
EN
Depending on a type and technological use ofNMaTAmachine; the savings may represent EUR 500 to
IRO
1,300 per year representing total savings inNVelectric energy up to EUR 13,000 in a 10 year operation.
E
R
Operating simplicity
Operating simplicity
All machine controls controls have in a way to meet
All the machine tool are designed been
operation in a way to criteria ofthe basic
designed ergonomic consider the machine and to
afford the operator as maximum usermachine and
attendance ergonomic criteria of the comfort
safety asafford the Control system panel moves
tool and possible. operator as maximum user
simultaneously withas possible. Supporting
comfort and safety the machine saddle.
control panel moves together with slide.
1 – 3000 mm/min
5 m/min
1-5000 mm/min
1 – 3000 mm/min-1
10 m/min
5000 mm/min-1
183 mm
1-5000 mm/min-1
790 mm
10000 mm/min-1
E N VI
Compatibility
Compatibility
Geometric machine accuracy corresponds
accuracy corresponds
to the requirements of STN ISO 1708 for
1708 for
requirements of STN
accurate lathes. CE mark is aaguarantee
lathes. CE mark is guarantee
that the lathe corresponds requirements
meets basic to the safety
and hygiene directives of EU.
of EU directives.
Cross-slide rapid drive
The carriages and the traverse
Longitudinal slide
Cross slide feed range feed range
Longitudinal traverse
Cross-slide rapid slide rapid traverse
Travel range feed range
Longitudinal slideX-axis
Travel range rapid
Longitudinal slideZ-axistraverse
Travel range X-axis
Tool post
Travel range Z-axis
10 kW
2
Standard:
Standard:
• Voltage 33xx 400V/50Hz
• Voltage 400V/50Hz
• Tool-holding fixture MultiSuisse B with holder BD25/140
• Spindle bore, Ø 42 – BAJONET B5
• Complete machining area guard cover preventing chip
• Tool-holding fixture MULTIFIX B with holder BD25/140
• from flying and coolant from splash, equipped with
Complete machining area guard cover preventing chip
the safety glass coolant from splash, equipped with
from flying and
• Automatic front door lock up
the safety glass
• Machining area illumination up
• Automatic front door lock
• Movable control panel
• Machining area illumination
• Complete cooling aggregate
• Movable control panel
• Complete cooling aggregate including the chip pan
• Central manual lubrication
• Central manual lubrication
• The operator’s tool kit
• The operator’s tool kit
• 1 x operating manual set
ON
M ENTAL
TRENS, a. s., Súvoz 1, 911 32 Trenãín, Slovakia
www.trens.sk
Telephone: +421/32/7412 620
We Shape the Shapes