MATERIAL SAFETY DATA SHEET0 pages

MSDS TG2012E / Aug. 12, 2013

MATERIAL SAFETY DATA SHEET
1. PRODUCT AND COMPANY IDENTIFICATION
Product Name: TOUGH GARD Anti-Spatter Liquid
Part Number: TG101-01, TG101-05, TG101-14S, TG101-32SP, TG101-55.
Product use: Water-based solution to protect welding torch components from excessive spatter
accumulation.
MANUFACTURER: Tregaskiss, 2570 North Talbot Road, Windsor, Ontario, Canada N0R 1L0,
Phone: 1-877-737-3111, Fax: 1-877-737-2111, E-mail: techsupport@tregaskiss.com
Emergency phone: 1-519-7373039 (8:00 am to 5:00 pm, time zone: -5)
2. HAZARDS IDENTIFICATION
GHS toxicity category: Not toxic
ECHA No hazardous substances by Directive EC 1272/2008 or 1907/2006 (REACH). No substances or
preparations in the list of SVHC. Declaration According to 91/115/EEC, 93/112/EEC: No hazardous
materials above the levels stipulated by 88/379/EEC.
WHMIS designation: Not controlled.
OSHA designation (29 CFR 1900.1200): Non-regulated.
Skin contact: Non-corrosive, May cause sensitization of susceptible persons by skin contact.
Eye contact: Non-corrosive to the eyes. May cause eye irritation.
Ingestion: Non-hazardous in case of ingestion. May cause vomiting. Avoid swallowing the product.
Inhalation: May cause nose, throat, or lung irritation. Avoid inhaling mist or fume.
Exposure Limits: Refer to the WEEL data in section 8.
Teratogenicity: Not known.
Carcinogenicity: Not known.
3. COMPOSITION INFORMATION ON INGREDIENTS
Product: Water based mixture (preparation).
Chemical Name
CAS #

Weight %

GADSL threshold

Class. 67/548/EC

Water
Ethoxylate
Magnesium Nitrate
Poly(ethylene oxide)
5-Chloro-2-methyl-4-isothiazolin-3-ketone
2-Methyl-4-isothiazolin-3-ketone
Proprietary Ingredients (not regulated)

80 – 90 %
0.47%
<230 ppm
150 ppm
<12.5 ppm
<4.5 ppm
10-20%

Not in list
Not in list
Not in list
Not in list
1000 ppm (0.1%)
1000 ppm (0.1%)
Not in list

Not in list
Not in list
Not in list
Not in list
Not in list
Not in list
Not in list

7732-18-5
84133-50-6
10377-60-3
25322-68-2
26172-55-4
2682-20-4

4: FIRST AID MEASURES
Skin: Wash with running water and soap.
Eye: Flush with running water for at least 15 minutes. Get medical attention if irritation develops.
Inhalation: Remove to fresh air. Assist in breathing if necessary. Get medical attention.
Ingestion: Rinse mouth and then drink plenty of water. Do not induce vomiting unless directed to do so
by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this
material are swallowed, call a physician immediately.
Notes to Physician: Toxicology studies on the main ingredients of this product have shown these to be
of very low acute toxicity and nonirritating. There is no specific antidote. Treatment of overexposure
should be directed at the control of symptoms and the clinical condition of the patient.

Tough Gard 1/4