HDD PIPE HANDLING system0 pages
HDD PIPE HANDLING system
Using vacuum technology, the new HDD Pipe Handling System is designed to lift
drill stem and position it into the rig without the use of slings or workers.
•t Tilts pipe from 0 to 30 degrees for loading and unloading drill pipe.
•t Precise angles and joint placement is achieved with wireless remote.
•t Handles all standard drill stem down to 3”.
•t Requires only one worker to transfer pipe into the drill for loading.
•t Handles pipe on and off trailer without disturbing adjacent pipe.
•t Meets or exceeds ANSI/ASME standard section B30.20, ASME BTH-1, and AS 4991.
•t CE certified and OSHA compliant.
•t Suitable for use with the MC Series.
tSYSTEMt
Lift Capacitiest
Pipe diametert
Dimensions (attachment only)
t
HDDt
1700 lb to 5400 lbt
Pipe from 4” to 18” (101 mm to 457 mm)t
tt
(771 kg to 2449 kg)t
*Single joints only in steel pipet
tt
*Depends on pad sizett
tttt
430 lb to 610 lb
(195 kg to 276 kg)
*Depends on pad size
Dimensions (with adaptor)
LIFTERt
Lift Capacitiest
Pipe Diametert
t
MC 3t
6,600 lb (3 Tonne)t
Pipe from 4” to 18” (101 mm to 457 mm) t
ttt
*Single joints only in steel pipet
tttt
tttt
Length 59” (1498 mm)
Height 65.5” (1663 mm)
Width 18.5” (470 mm)
Weight 1,183 lbs (536 kg)
t
MC 5t
11,000 lb (5 Tonne)t
Pipe from 4” to 18” (101 mm to 457 mm) t
ttt
*Single joints only in steel pipet
tttt
tttt
Length 64.5” (1638 mm)
Height 65.5” (1663 mm)
Width 20” (508 mm)
Weight 1,828 lbs (829 kg)
+1-918-259-3050 | requests@vacuworx.com | 10105 East 55th Place, Tulsa, Oklahoma 74146 USA | vacuworx.com
"